Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />1.Tag Material: Brass, 0.032-inch, Stainless steel, 0.025-inch, Aluminum, 0.032-inch, or <br />anodized aluminum, 0.032-inch minimum thickness, and having predrilled or stamped <br />holes for attachment hardware. <br />2.Fasteners: Brass wire-link or beaded chain; or S-hook. <br />B.Valve Schedules: For each piping system, on 8-1/2-by-11-inch bond paper. Tabulate valve <br />number, piping system, system abbreviation (as shown on valve tag), location of valve (room or <br />space), normal-operating position (open, closed, or modulating), and variations for <br />identification. Mark valves for emergency shutoff and similar special uses. <br />1.Valve-tag schedule shall be included in operation and maintenance data. <br />2.6 WARNING TAGS <br />A.Warning Tags: Preprinted or partially preprinted, accident-prevention tags, of plasticized card <br />stock with matte finish suitable for writing. <br />1.Size: Approximately 4 by 7 inches. <br />2.Fasteners: Brass grommet and wire. <br />3.Nomenclature: Large-size primary caption such as "DANGER," "CAUTION," or "DO <br />NOT OPERATE." <br />4.Color: Yellow background with black lettering. <br />PART 3 - EXECUTION <br />3.1 PREPARATION <br />A.Clean piping and equipment surfaces of substances that could impair bond of identification <br />devices, including dirt, oil, grease, release agents, and incompatible primers, paints, and <br />encapsulants. <br />3.2 EQUIPMENT LABEL INSTALLATION <br />A.Install or permanently fasten labels on each major item of mechanical equipment. <br />B.Locate equipment labels where accessible and visible. <br />3.3 PIPE LABEL INSTALLATION <br />A.Piping Color-Coding: Painting of piping is specified in Division 09 Section "Interior Painting." <br />B.Stenciled Pipe Label Option: Stenciled labels may be provided instead of manufactured pipe <br />labels, at Installer's option. Install stenciled pipe labels with painted, color-coded bands or <br />rectangles , complying with ASME A13.1, on each piping system. <br />1.Identification Paint: Use for contrasting background. <br />2.Stencil Paint: Use for pipe marking.