Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />HVAC INSULATION 23 0700 - 4 <br />b.Pittsburgh Corning Corporation; Foamglas Super K. <br />c.Other manufacturers by voluntary alternate. <br />2.Block Insulation: ASTM C 552, Type I. <br />3.Special-Shaped Insulation: ASTM C 552, Type III. <br />4.Board Insulation: ASTM C 552, Type IV. <br />5.Preformed Pipe Insulation without Jacket: Comply with ASTM C 552, Type II, Class 1. <br />6.Preformed Pipe Insulation with Factory-Applied ASJ: Comply with ASTM C 552, <br />Type II, Class 2. <br />7.Factory fabricate shapes according to ASTM C 450 and ASTM C 585. <br />H.Flexible Elastomeric: Closed-cell, sponge- or expanded-rubber materials. Comply with <br />ASTM C 534, Type I for tubular materials and Type II for sheet materials. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Aeroflex USA Inc.; Aerocel. <br />b.Armacell LLC; AP Armaflex. <br />c.Other manufacturers by voluntary alternates. <br />I.Mineral-Fiber Blanket Insulation: Mineral or glass fibers bonded with a thermosetting resin. <br />Comply with ASTM C 553, Type II and ASTM C 1290. Factory-applied jacket requirements <br />are specified in "Factory-Applied Jackets" Article. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.CertainTeed Corp.; Duct Wrap. <br />b.Johns Manville; Microlite. <br />c.Knauf Insulation; Duct Wrap. <br />d.Owens Corning; All-Service Duct Wrap. <br />e.Other manufacturers by voluntary alternates. <br />J.High-Temperature, Mineral-Fiber Blanket Insulation: Mineral or glass fibers bonded with a <br />thermosetting resin. Comply with ASTM C 553, Type V, without factory-applied jacket. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Johns Manville <br />b.Knauf Insulation <br />c.Owens Corning <br />d.Other manufacturers by voluntary alternates. <br />K.Mineral-Fiber Board Insulation: Mineral or glass fibers bonded with a thermosetting resin. <br />Comply with ASTM C 612, Type IA or Type IB. For duct and plenum applications, provide <br />insulation with factory-applied ASJ or with factory-applied FSK jacket. For equipment <br />applications, provide insulation with factory-applied ASJ or with factory-applied FSK jacket. <br />Factory-applied jacket requirements are specified in "Factory-Applied Jackets" Article.