Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />HVAC INSULATION 23 0700 - 5 <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.CertainTeed Corp.; Commercial Board. <br />b.Johns Manville; 800 Series Spin-Glas. <br />c.Knauf Insulation; Insulation Board. <br />d.Owens Corning; Fiberglas 700 Series. <br />e.Other manufacturers by voluntary alternates. <br />L.High-Temperature, Mineral-Fiber Board Insulation: Mineral or glass fibers bonded with a <br />thermosetting resin. Comply with ASTM C 612, Type III, without factory-applied jacket. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Johns Manville. <br />b.Owens Corning. <br />c.Thermafiber. <br />d.Other manufacturers by voluntary alternates. <br />M.Mineral-Fiber, Preformed Pipe Insulation: <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Johns Manville; Micro-Lok. <br />b.Knauf Insulation; 1000 Pipe Insulation. <br />c.Owens Corning; Fiberglas Pipe Insulation. <br />d.Other manufacturers by voluntary alternates. <br />2.Type I, 850 deg F Materials: Mineral or glass fibers bonded with a thermosetting resin. <br />Comply with ASTM C 547, Type I, Grade A, with factory-applied ASJ or with factory- <br />applied ASJ-SSL. Factory-applied jacket requirements are specified in "Factory-Applied <br />Jackets" Article. <br />N.Mineral-Fiber, Pipe Insulation Wicking System: Preformed pipe insulation complying with <br />ASTM C 547, Type I, Grade A, with absorbent cloth factory applied to the entire inside surface <br />of preformed pipe insulation and extended through the longitudinal joint to outside surface of <br />insulation under insulation jacket. Factory apply a white, polymer, vapor-retarder jacket with <br />self-sealing adhesive tape seam and evaporation holes running continuously along the <br />longitudinal seam, exposing the absorbent cloth. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Knauf Insulation; Permawick Pipe Insulation. <br />b.Owens Corning; VaporWick Pipe Insulation. <br />c.Other manufacturer by voluntary alternates.