Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />HVAC INSULATION 23 0700 - 9 <br />b.Foster Products Corporation, H. B. Fuller Company; 85-20. <br />c.Other manufacturers by voluntary alternates. <br />2.For indoor applications, use adhesive that has a VOC content of 50 g/L or less when <br />calculated according to 40 CFR 59, Subpart D (EPA Method 24). <br />H.PVC Jacket Adhesive: Compatible with PVC jacket. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Dow Chemical Company (The); 739, Dow Silicone. <br />b.Johns-Manville; Zeston Perma-Weld, CEEL-TITE Solvent Welding Adhesive. <br />c.Other manufacturers by voluntary alternates. <br />2.For indoor applications, use adhesive that has a VOC content of 50 g/L or less when <br />calculated according to 40 CFR 59, Subpart D (EPA Method 24). <br />2.4 MASTICS <br />A.Materials shall be compatible with insulation materials, jackets, and substrates; comply with <br />MIL-C-19565C, Type II. <br />1.For indoor applications, use mastics that have a VOC content of 50 g/L or less when <br />calculated according to 40 CFR 59, Subpart D (EPA Method 24). <br />B.Vapor-Barrier Mastic: Water based; suitable for indoor and outdoor use on below ambient <br />services. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Childers Products, Division of ITW; CP-35. <br />b.Foster Products Corporation, H. B. Fuller Company; 30-90. <br />c.Vimasco Corporation; 749. <br />d.Other manufacturers by voluntary alternates. <br />2.Water-Vapor Permeance: ASTM E 96, Procedure B, 0.013 perm at 43-mil dry film <br />thickness. <br />3.Service Temperature Range: Minus 20 to plus 180 deg F. <br />4.Solids Content: ASTM D 1644, 59 percent by volume and 71 percent by weight. <br />5.Color: White. <br />C.Vapor-Barrier Mastic: Solvent based; suitable for indoor use on below ambient services. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Childers Products, Division of ITW; CP-30. <br />b.Foster Products Corporation, H. B. Fuller Company; 30-35. <br />c.Other manufacturers by voluntary alternates.