Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />HVAC INSULATION 23 0700 - 8 <br />C.Cellular-Glass, Phenolic, Polyisocyanurate, and Polystyrene Adhesive: Solvent-based resin <br />adhesive, with a service temperature range of minus 75 to plus 300 deg F. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Foster Products Corporation, H. B. Fuller Company; 81-33. <br />b.Other manufacturers by voluntary alternates. <br />2.For indoor applications, use adhesive that has a VOC content of 50 g/L or less when <br />calculated according to 40 CFR 59, Subpart D (EPA Method 24). <br />D.Flexible Elastomeric and Polyolefin Adhesive: Comply with MIL-A-24179A, Type II, Class I. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Aeroflex USA Inc.; Aeroseal. <br />b.Armacell LCC; 520 Adhesive. <br />c.Foster Products Corporation, H. B. Fuller Company; 85-75. <br />d.Other manufacturers by voluntary alternates. <br />2.For indoor applications, use adhesive that has a VOC content of 50 g/L or less when <br />calculated according to 40 CFR 59, Subpart D (EPA Method 24). <br />E.Mineral-Fiber Adhesive: Comply with MIL-A-3316C, Class 2, Grade A. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Childers Products, Division of ITW; CP-82. <br />b.Foster Products Corporation, H. B. Fuller Company; 85-20. <br />c.Other manufacturers by voluntary alternates. <br />2.For indoor applications, use adhesive that has a VOC content of 80 g/L or less when <br />calculated according to 40 CFR 59, Subpart D (EPA Method 24). <br />F.Polystyrene Adhesive: Solvent- or water-based, synthetic resin adhesive with a service <br />temperature range of minus 20 to plus 140 deg F. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Childers Products, Division of ITW; CP-96. <br />b.Foster Products Corporation, H. B. Fuller Company; 97-13. <br />c.Other manufacturers by voluntary alternates. <br />G.ASJ Adhesive, and FSK and PVDC Jacket Adhesive: Comply with MIL-A-3316C, Class 2, <br />Grade A for bonding insulation jacket lap seams and joints. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Childers Products, Division of ITW; CP-82.