Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />HVAC INSULATION 23 0700 - 14 <br />2.9 TAPES <br />A.ASJ Tape: White vapor-retarder tape matching factory-applied jacket with acrylic adhesive, <br />complying with ASTM C 1136. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Avery Dennison Corporation, Specialty Tapes Division; Fasson 0835. <br />b.Other manufacturers by voluntary alternate. <br />2.Width: 3 inches. <br />3.Thickness: 11.5 mils. <br />4.Adhesion: 90 ounces force/inch in width. <br />5.Elongation: 2 percent. <br />6.Tensile Strength: 40 lbf/inch in width. <br />7.ASJ Tape Disks and Squares: Precut disks or squares of ASJ tape. <br />B.FSK Tape: Foil-face, vapor-retarder tape matching factory-applied jacket with acrylic adhesive; <br />complying with ASTM C 1136. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Avery Dennison Corporation, Specialty Tapes Division; Fasson 0827. <br />b.Other manufacturers by voluntary alternate. <br />2.Width: 3 inches. <br />3.Thickness: 6.5 mils. <br />4.Adhesion: 90 ounces force/inch in width. <br />5.Elongation: 2 percent. <br />6.Tensile Strength: 40 lbf/inch in width. <br />7.FSK Tape Disks and Squares: Precut disks or squares of FSK tape. <br />C.PVC Tape: White vapor-retarder tape matching field-applied PVC jacket with acrylic adhesive. <br />Suitable for indoor and outdoor applications. <br />1.Products: Subject to compliance with requirements, provide one of the following: <br />a.Avery Dennison Corporation, Specialty Tapes Division; Fasson 0555. <br />b.Other manufacturers by voluntary alternate. <br />2.Width: 2 inches. <br />3.Thickness: 6 mils. <br />4.Adhesion: 64 ounces force/inch in width. <br />5.Elongation: 500 percent. <br />6.Tensile Strength: 18 lbf/inch in width. <br />D.Aluminum-Foil Tape: Vapor-retarder tape with acrylic adhesive. <br />1.Products: Subject to compliance with requirements, provide one of the following: