Laserfiche WebLink
Data Sheet <br />Enphase Microinverters <br />Region AMERICAS <br />Enphase <br />IQ 7A Microinverter <br />0 <br />To learn more about Enphase offerings, visit enphase.com <br />The high-powered smart grid -ready <br />Enphase IQ 7A Micro- dramatically simplifies the <br />installation process while achieving the highest <br />system efficiency for systems with 60-cel I and <br />72-cell modules. <br />Part of the Enphase IQ System, the IQ 7A Micro <br />integrates with the Enphase IQ Envoy', Enphase IQ <br />Battery', and the Enphase Enlighten- monitoring <br />and analysis software. <br />The IQ Series Microinverters extend the reliability <br />standards set forth by previous generations and <br />undergo over a million hours of power -on testing, <br />enabling Enphase to provide an industry -leading <br />warranty of up to 25 years. <br />High Power <br />• Peak output power 366 VA @ 240 VAC and 295 VA @ 208 VAC <br />Easy to Install <br />Lightweight and simple <br />Faster installation with improved, lighter two -wire cabling <br />Built-in rapid shutdown compliant (NEC 2014, 2017 & 2020) <br />Efficient and Reliable <br />Optimized for high powered 60-cell and 72-cell modules <br />Highest CEC efficiency of 97 i <br />More than a million hours of testing <br />Class II double -insulated enclosure <br />UL listed <br />Smart Grid Ready <br />Complies with advanced grid support, voltage and frequency ride - <br />through requirements <br />Envoy and Internet connection required <br />Configurable for varying grid profiles <br />Meets CA Rule 21 (UL 1741-SA) <br />':I ENPHASE <br />Enphase IQ 7A Microinverter <br />INPUT (DC) IQ7A-72-2-US <br />Commonly used module pairings' <br />295 W-460 W + <br />Module compatibility <br />60-cell, 66-cell and 72-cell PV modules <br />Maximum input DC voltage <br />58 V <br />Power point tracking voltage range2 <br />18 V-58 V <br />Min/Max start voltage <br />33 V / 58 V <br />Max DC short circuit current (module Isc)' <br />15 A <br />Overvoltage class DC port <br />II <br />DC port backfeed current <br />0 A <br />PV array configuration <br />1 x 1 ungrounded array; No additional DC side protection required, <br />AC side protection requires max 20A per branch circuit <br />OUTPUT (AC) <br />@ 240 VAC <br />@ 208 VAC <br />Peak output power <br />366 VA <br />295 VA <br />Maximum continuous output power <br />349 VA <br />290 VA <br />Nominal (L-L) voltage/range4 <br />240 V / 211-264 V <br />208 V / 183-229 V <br />Maximum continuous output current <br />1,45 A (240 VAC) <br />1,39 A (208 VAC) <br />Nominal frequency <br />60 Hz <br />Extended frequency range <br />47-68 Hz <br />AC short circuit fault current over 3 cycles <br />5.8 Arms <br />Maximum units per 20 A (L-L) branch circuit' <br />11 (240 VAC) <br />11 (208 VAC) <br />Overvoltage class AC port <br />III <br />AC port backfeed current <br />18 mA <br />Power factor setting <br />1.0 <br />Power factor (adjustable) <br />0.85leading... 0.85lagging <br />EFFICIENCY <br />@240 VAC <br />@208 VAC <br />GEC weighted efficiency <br />97.0 % <br />96.5% <br />MECHANICAL <br />Ambient temperature range <br />-40°C to +60°C <br />Relative humidity range <br />4%to 100`Y (condensing) <br />Connector type: DC(IQ7A-72-2-US) <br />MC4 <br />Dimensions (HxWxD) <br />212 mm x 175 mm x 30.2 mm (without <br />bracket) <br />Weight <br />1.08 kg (2.38 Ibs) <br />Cooling <br />Natural convection - No fans <br />Approved for wet locations Yes <br />Pollution degree PD3 <br />Enclosure <br />Class II double -insulated, corrosion resistant polymeric enclosure <br />Environmental category / UV exposure rating <br />NEMA Type 6 / outdoor <br />FEATURES <br />Communication <br />Power Line Communication (PLC) <br />Monitoring <br />Enlighten Manager and MyEnlighten monitoring options <br />Compatible with Enphase IQ Envoy <br />Disconnecting means <br />The AC and DC connectors have been evaluated and approved by UL for use as the load -break <br />disconnect required by NEC 690. <br />Compliance <br />CA Rule 21 (UL 1741-SA) <br />UL 62109-1. UL1741/IEEE1547. FCC Part 15 Class B, ICES-0003 Class B, <br />CAN/CSA-C22.2 NO. 107.1-01 <br />This product is UL Listed as PV Rapid Shut Down Equipment and conforms with NEC 2014, NEC <br />2017 and NEC 2020, section 690.12 and C22.1-2015 Rule 64-218 Rapid Shutdown of PV Systems, <br />for AC and DC conductors, when installed according manufacturer's instructions. <br />1. No enforced DC/AC ratio. See the compatibility calculator at h1UajLeaittasecom/emus/suotwrt/module-com4iLbjhty. <br />2. CEC peak power tracking voltage range is 38 V to 43 V <br />3. Maximum continuous input DC current is 10.2A <br />4. Voltage range can be extended beyond nominal if required by the utility <br />5 Limas may vary Refer to local requirements to define the number of microinverters per branch in your area. <br />To learn more about Enphase offerings, visit enphase.com <br />Z 2021 Enphase Energy All rights reserved. Enphase, the Enphase logo. Enphase 10 7A, Enphase IQ Battery, Enphase Enlighten, Enphase IQ E N P H A S E <br />Envoy, and other trademarks or service names are the trademarks of Enphase Energy, Inc Data subject to changey <br />11-04-2021 <br />CONTRACTOR <br />Approved <br />FOR PERMIT ISSUAN <br />r A <br />Master I'� <br />Date: <br />AIA/C i'+'1i r <br />AWS Electrical & Solar Inc. <br />Address: 11750 Roscoe Blvd <br />Los Angeles, CA 91352 <br />Phone number: 1-818-484-3264 <br />License: C-10 #901196 <br />Florin Muntean <br />INVERTER <br />DATA SHEET <br />SOLAR MODULES <br />5 REC Solar 400 Watt <br />Model # REC400AA Pure <br />INVERTER <br />INVERTER TYPE: Micro: <br />_�L EnphaselQ7A <br />Model # IQ7A-72-2-US(240V) <br />DATE.- 0712612025 <br />Project Name: <br />Jeremy Levine <br />Property Adress: <br />414 E Pine St, Unit B, <br />Santa Ana, CA 92701 <br />Project: <br />Scale: <br />PV SYSTEM <br />AS INDICATED <br />7DF 6.0 <br />