Laserfiche WebLink
MW <br />J MEAN WELL 60WSingle0utputLEDPowerSupply CLG-60 series <br />ir=,2,».- <br />I Features : <br />• Universal AC input / Full range (up to 295VAC) <br />• Built-in active PFC function <br />· High efficiency up to 89% <br />· Protections: Short circuit / Over current / Over voltage / Over temperature <br />· Cooling by free air convection <br />· IP67 design for indoor or outdoor installations <br />' UL1310(lass 2 power unit <br />· Pass LPS <br />• 100% full load burn-in test <br />• High reliability <br />• Suitable for LED lighting and moving sign applications (Note.2) <br />• Compliance to worldwide safety regulations for lighting <br />• Suitable for dry / damp / wet locations <br />· 3 years warranty <br />807 7**SELV LPS 9U 1 101 4•vonly) c ,aus { excepttor 4.v)IP67 ®[El*1 gil (opnon)lor20-27V < <br />SPECIFICATION <br />MODEL CLG-60-12 CLG-60-15 CLG-60-20 CLG-60-24 CLG-60·27 CLG-60-36 CLG-60-48 <br />DC VOLTAGE 12V 15V 20V 24V 27V 36V 48V <br />CONSTANT CURRENT REGION Note.5 8.4 -12V 10.5 - 15V 14 - 20V 16.8 - 24V 18.9-27V 25.2 - 36V 33.6 - 48V <br />RATED CURRENT 5A 4A 3A 2.5A 2.3A 1.7A 1.3A <br />CURRENT RANGE 0-5A 0-4A 0-3A 0 - 2.5A 0 - 2.3A 0-1.7A 0 - 1.3A <br />RATED POWER 60W 60W 60W 60W 62.1W 61.2W 62.4W <br />RIPPLE & NOISE (max.) Note.2 2Vp-p 2.4Vp-p 1.8Vp-p 2.7Vp-p 2.7Vp-p 3.6Vp-p 4.6Vp-p <br />OUTPUT 11.5-13V 14.5-16.2V 19.5-22V 24 - 26V 25 - 30V 32.5 - 39V 43.6-51.8V <br />VOLTAGE AOJ. RANGE <br />Fixed can be morified between the range above <br />CURRENTAOJ. RANGE Fixed. Can be modified between 3% - -25% rated output current <br />VOLTAGE TOLERANCE Note.3 110% <br />LINE REGULATION 13.0% <br />LOAD REGULATION t5.0% <br />SETUPTIME 3000ms / 230VAC 5000ms / 115VAC at full load <br />VOLTAGE RANGE Note.4 90 - 295VAC 127-417VDC <br />FREQUENCY RANGE 47 - 63Hz <br />POWER FACTOR (Typ.)PF>0.94/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to 'Power Factor Characteristic- curve) <br />INPUT EFFICIENCY (Typ.)85% |86% |87.5% |87% |88%189%1 89% <br />AC CURRENT (Typ.)0.8A/115VAC 0.4A/230VAC 0.3A/277VAC <br />INRUSH CURRENT(max.)40A/230VAC <br />LEAKAGE CURRENT <0.75mA / 240VAC <br />95 - 110% <br />OVER CURRENT <br />Protection type : Constant current limiting, recovers automatically after fault condition is removed <br />SHORTCIRCUIT Hiccup mode, recovers automatically after fault condition is removed <br />13.8 - 16V |17.5-21V |23 - 26V |28 - 32V |31 - 35V |41 - 46V |54 - 60V <br />OVER VOLTAGE <br />PROTECTION Protection type : Shut down 0/p voltage, re-power on to recover <br />12V: 901 110°C (TSW1) detect on heatsink of power transistor <br />OVERTEMPERATURE 15V -48V: 85t t10'C (TSW1) detecton heatsinkof powertransistor <br />Protection type : Shut down 0/p voltage, recovers automatically after temperature goes down <br />WORKINGTEMP.-30 - +70°C (Refer to 'Derating Curve") <br />WORKING HUMIDITY 20 - 95% RH non-condensing <br />ENVIRONMENT STORAGE TEMP.,HUMIDITY -40 - +80t,10 - 95% RH <br />TEMR COEFFICIENT 10.03%/°C (0 - 50'C) <br />VIBRATION 10 - 500Hz, 5G 12min./lcycle, period for 72min. each along X, Y, 2 axes <br />UL879, UL8750, UL1310 Class 2, TUV EN61347-1, EN61347-2-13 independent, CAN/CSA C22.2 No. 223-M91(except for48V) ;SAFETY STANDARDS <br />161347-1, J61347-2-13(option, 20-270nly), IP67 approved <br />SAFETY & WITHSTAND VOLTAGE 1/P-O/P:3.75KVAC 1/P-FG: 1.88KVAC O/P-FG:0.5KVAC <br />EMC ISOLATION RESISTANCE 1/plo/P: 100M Ohms / 500VDC / 25°C/ 70% RH <br />EMC EMISSION Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (275% load) : EN61000-3-3 <br />EMC IMMUNITY Compliance to EN610004-2,3,4,5,6,8.11, EN55024, EN61547, light industry level (surge 4KV), criteria A <br />MTBF 495.7Khrs min.MIL-HDBK-217F (25°C) <br />OTHERS DIMENStON 195.6*61.5*38.8mm (CW'H) <br />PACKING 0.86Kg; 16pcs/14.8Kg/0.54CUFT <br />NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, ra load and 25°C of ambient temperature. <br />2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" tusted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. <br />3. Tolerance : includes set up tolerance, line regula load regulalion. <br />4. Derating may be needed under low input voltage. Please check the static characteristics for more details. <br />5. Constant current operation region is within 70% -100% rated output voltage. This is the suitable operation region for LED related applications, but please <br />reconfirm special electrical requirements for some specific system design. <br />6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the <br />complete installation, the final equipmem manufacturers must re-quaJify EMC Directive on the complete installa <br />7. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. <br />File Nome:CLG-·60·SPEC 2011·10-31