Laserfiche WebLink
CITY OF SANTA ANA <br />SPECIFICATIONS <br />PROJECT NO.: XX-XXXX <br />PROJECT TITLE <br /> <br />48 <br />measure the amount of emulsified recycling agent to within 0.5 percent of the amount <br />required by the mix design or as adjusted in the field. <br />G. COLD IN-PLACE RECYCLING (CIR) / COLD CENTRAL PLANT RECYCLING <br />(CCPR) EQUIPMENT <br />General <br />CIR/CCPR equipment shall be capable of milling and crushing or sizing the existing <br />asphalt pavement. The equipment used for mixing the cold millings with the <br />emulsified recycling agent shall be capable of producing a homogeneous and <br />uniformly coated recycled pavement mixture. The equipment used for placement of <br />the recycled pavement mixture shall be capable of placement to the lines, grades, and <br />requirements specified in these special provisions and shown on the plans. The <br />Contractor shall have available on the site of the work all equipment and materials to <br />be used for recycling operations. <br />CIR Equipment <br />Areas inaccessible to the CIR equipment due to vertical curves, horizontal curves <br />and/or grades, cul-de-sac or any other circumstance shall be milled, recycled in <br />adjacent roadway segments, or removed and replaced at the discretion of the <br />Engineer. <br />1. Pavement Milling Machine <br />The pavement milling machine shall be self-propelled. The primary milling <br />equipment shall have a minimum 12.5-feet cutter capable of removing the <br />existing pavement to the depths shown in the plans. Milling equipment shall be <br />equipped with automatic depth controls capable of maintaining the cutting depth <br />to within ¼-inch of the desired depth, and shall have a positive means for <br />controlling cross slope. The milling operation shall not disturb or damage the <br />underlying material. The use of a heating device to soften the pavement will not <br />be permitted. A smaller milling machine may be used to mill the shoulders and <br />miscellaneous areas. <br />2. Crushing or Sizing Equipment <br />Crushing or sizing equipment shall be capable of producing reclaimed asphalt <br />pavement to the size required prior to mixing millings with emulsified recycling <br />agent. <br />3. Mixing and Proportioning Equipment <br />The mixing equipment shall be capable of mixing the cold milled reclaimed <br />asphalt pavement, emulsified recycling agent, and water to produce a completely <br />and uniformly mixed, homogeneous recycled pavement mixture. <br />505 E Central Ave <br />#B11/6/2024