Laserfiche WebLink
CITY OF SANTA ANA <br />SPECIFICATIONS <br />PROJECT NO.: XX-XXXX <br />PROJECT TITLE <br /> <br />94 <br />4.27 LIGHT EMITTING DIODE (LED) LUMINAIRES <br />All new luminaires shall be light emitting diode (LED), I.E.S. Type III distribution, full cut- <br />off, as shown on the plans. All new luminaires shall be Leotek GC1-60F-MV-NW-2-GY- <br />700 GreenCobra™ LED Street Light. Each luminaire shall be equipped with photoelectric <br />control. <br />Written warranty must be provided by manufacturer for full replacement of the luminaire <br />due to any failure for a minimum period of seven (7) years. Luminaires shall, at the sole <br />discretion of the City, be repaired or replaced if the luminaire fails to function as <br />described in the above specifications for a period of eighty-four (84) months from date of <br />installation. All luminaires shall be SCE prequalified. <br />4.28 CONDUCTOR LABELING <br />Conductors shall be labeled in all pull boxes and in the traffic signal cabinet. <br />1. Labeling Convention: <br />a. Conductor Signal Cable shall be labeled to indicate cable size and signal <br />phases (Ex. 12 CSC, P1&6 for 12 conductor cable, phases 1 & 6). <br />b. Detector Lead-In cable shall be label to show detector designation per plan <br />(Ex. DLC 1-P2, DLC 2-P2). <br />c. System Detection Lead-In cable (SDLC) shall be labeled to show detector <br />designation per plan (Ex. SDLC-SD1 for system detection SD1) <br />d. Signal Interconnect cable (SIC) shall be labeled to size and content (Ex. <br />12PR#19). <br />e. Video Detection (VD) cable shall be labeled to indicate video camera and <br />phase or power (Ex. VD-P8 for phase 8 video camera cables or VD-P8 PWR <br />for phase 8 Video camera power cable). <br />f. Emergency Vehicle Pre-emption Cable shall be labeled to indicate EVP and <br />phase or power (Ex. EVP-A for EVP cable channel A or EVP-A PWR for <br />EVP power cable). <br />g. Closed Circuit Television (CCTV) cable shall be labeled to indicate camera or <br />power (Ex. CCTV-1 for CCTV camera 1 or CCTV-1 PWR for CCTV 1 power <br />cable). <br />h. Changeable Message Signs cable shall be labeled to indicate sign or power <br />(Ex. CMS-1 for sign 1 or CMS-1 PWR for sign 1 power cable). <br />505 E Central Ave <br />#B11/6/2024