Laserfiche WebLink
ST. BARBARA CATHOLIC SCHOOL TASK 2 75-24272-01 <br />DIOCESE OF ORANGE SEPTEMBER 12TH, 2024 <br />SANTA ANA, CA BID & PERMIT SET <br /> <br />QUALITY REQUIREMENTS 014000 - 1 <br />SECTION 014000 - QUALITY REQUIREMENTS <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary <br />Conditions and other Division 01 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A. Section includes administrative and procedural requirements for quality assurance and quality <br />control. <br />B. Testing and inspection services are required to verify compliance with requirements specified or <br />indicated. These services do not relieve Contractor of responsibility for compliance with the <br />Contract Document requirements. <br />1. Specific quality-assurance and quality-control requirements for individual work results <br />are specified in their respective Specification Sections. Requirements in individual <br />Sections may also cover production of standard products. <br />2. Specified tests, inspections, and related actions do not limit Contractor's other quality - <br />assurance and quality-control procedures that facilitate compliance with the Contract <br />Document requirements. <br />3. Requirements for Contractor to provide quality-assurance and quality-control services <br />required by Architect, Owner, Commissioning Authority, or authorities having <br />jurisdiction are not limited by provisions of this Section. <br />4. Specific test and inspection requirements are not specified in this Section. <br />1.3 DEFINITIONS <br />A. Experienced: When used with an entity or individual, "experienced" unless otherwise further <br />described means having successfully completed a minimum of five previous projects similar in <br />nature, size, and extent to this Project; being familiar with special requirements indicated; and <br />having complied with requirements of authorities having jurisdiction. <br />B. Field Quality-Control Tests: Tests and inspections that are performed on-site for installation of <br />the Work and for completed Work. <br />C. Installer/Applicator/Erector: Contractor or another entity engaged by Contractor as an <br />employee, Subcontractor, or Sub-subcontractor, to perform a particular construction operation, <br />including installation, erection, application, assembly, and similar operations.