Laserfiche WebLink
ST. BARBARA CATHOLIC SCHOOL TASK 2 75-24272-01 <br />DIOCESE OF ORANGE SEPTEMBER 12TH, 2024 <br />SANTA ANA, CA BID & PERMIT SET <br /> <br />PRODUCT REQUIREMENTS 016000 - 1 <br />SECTION 016000 - PRODUCT REQUIREMENTS <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary <br />Conditions and other Division 01 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A. Section includes administrative and procedural requirements for selection of products for use in <br />Project; product delivery, storage, and handling; manufacturers' standard warranties on <br />products; special warranties; and comparable products. <br />B. Related Requirements: <br />1. Section 012300 "Alternates" for products selected under an alternate. <br />2. Section 012500 "Substitution Procedures" for requests for substitutions. <br />3. Section 014200 "References" for applicable industry standards for products specified. <br />1.3 DEFINITIONS <br />A. Products: Items obtained for incorporating into the Work, whether purchased for Project or <br />taken from previously purchased stock. The term "product" includes the terms "material," <br />"equipment," "system," and terms of similar intent. <br />1. Named Products: Items identified by manufacturer's product name, including make or <br />model number or other designation shown or listed in manufacturer's published product <br />literature that is current as of date of the Contract Documents. <br />2. New Products: Items that have not previously been incorporated into another project or <br />facility. Products salvaged or recycled from other projects are not considered new <br />products. <br />3. Comparable Product: Product that is demonstrated and approved by Architect through <br />submittal process to have the indicated qualities related to type, function, dimension, in - <br />service performance, physical properties, appearance, and other characteristics that equal <br />or exceed those of specified product. <br />B. Basis-of-Design Product Specification: A specification in which a single manufacturer's product <br />is named and accompanied by the words "basis-of-design product," including make or model <br />number or other designation. In addition to the basis-of-design product description, product <br />attributes and characteristics may be listed to establish the significant qualities related to type, <br />function, in-service performance and physical properties, weight, dimension, durability, visual <br />characteristics, and other special features and requirements for purposes of evaluating <br />comparable products of additional manufacturers named in the specification.