Laserfiche WebLink
ST. BARBARA CATHOLIC SCHOOL TASK 2 75-24272-01 <br />DIOCESE OF ORANGE SEPTEMBER 12TH, 2024 <br />SANTA ANA, CA BID & PERMIT SET <br /> <br />IDENTIFICATION FOR ELECTRICAL SYSTEMS 260532 - 1 <br />SECTION 260532 - IDENTIFICATION FOR ELECTRICAL SYSTEMS <br />PART 1 - GENERAL <br />1.1 WORK INCLUDED <br />A. Nameplates. <br />B. Wire and cable markers. <br />1.2 SUBMITTALS <br />A. Submit shop drawings under provisions of Division 01. <br />B. Include schedule for nameplates and tape labels. <br />PART 2 - PRODUCTS <br />2.1 MATERIALS <br />A. Nameplates: Engraved three-layer laminated plastic, white letters on a black background. <br />B. Wire and Cable Markers: Cloth markers, split sleeve or tubing type. <br />PART 3 - EXECUTION <br />3.1 INSTALLATION <br />A. Degrease and clean surfaces to receive nameplates. <br />B. Install nameplates and tape labels parallel to equipment lines. <br />C. Secure nameplates to equipment fronts using screws, or rivets. Secure nameplate to inside face <br />of recessed panelboard doors in finished locations. <br />D. Embossed tape will not be permitted for any application. <br />3.2 WIRE IDENTIFICATION <br />A. Provide wire markers on each conductor in panelboard gutters, pull boxes, outlet and <br />junction boxes, and at load connection. Identify with panel and branch circuit or feeder <br />number for power and lighting circuits, and with control wire number as indicated on