Laserfiche WebLink
ST. BARBARA CATHOLIC SCHOOL TASK 2 75-24272-01 <br />DIOCESE OF ORANGE SEPTEMBER 12TH, 2024 <br />SANTA ANA, CA BID & PERMIT SET <br /> <br />DECORATIVE METAL FENCES AND GATES 323119 - 3 <br />B. Polyester Topcoat: <br />a. Polyester Powder Coat Finish: Manufacturer’s standard baked-on finish in black <br />color. Powder coat all pickets, channels, posts, fittings, and accessories <br />individually after drilling and layout to ensure maximum corrosion protection. <br />Coating of assembled sections is unacceptable. <br />2.3 MISCELLANEOUS MATERIALS <br />A. Nonshrink Grout: Factory-packaged, nonstaining, noncorrosive, nongaseous grout complying <br />with ASTM C 1107 and specifically recommended by manufacturer for exterior applications. <br />2.4 DECORATIVE METALLIC-COATED STEEL TUBULAR PICKET FENCES <br />A. Decorative Steel Fences: Fences made from metallic-coated steel tubing and shapes. <br />1. Basis-of-Design Product: Subject to compliance with requirements, provide Montage II <br />Welded and Rackable ornamental steel design by Ameristar Fence Products, Inc., Tulsa, <br />Oklahoma or approved equal. <br />a. Height: as indicated on the drawings <br />B. Steel material for fence panels and posts shall conform to the requirements of ASTM <br />A653/A653M, with a minimum yield strength of 45,000 psi (310 MPa) and a minimum zinc <br />(hot-dip galvanized) coating weight of 0.90 oz/ft2 (276 g/m2), Coating Designation G-90. <br />C. Material for pickets shall be 1” square x 14 Ga. tubing. The rails shall be steel channel, 1.75” x <br />1. 75” x .105”. Picket holes in the rail shall be spaced 4.715” o.c. Fence posts and gate posts <br />shall meet the minimum size requirements of Table 1: <br />D. <br />Table 1 – Minimum Sizes for Montage II Posts <br /> Panel Height <br />2-1/2” x 12 Ga. Up to & Including 6’ Height <br />3” x 12 Ga. Over 6’ Up to & Including 8’ Height <br /> <br />Fence Posts Gate Height <br />Up to & Including 4’ Over 4’ Up to & In- <br />cluding 6’ <br />Over 6’ Up to & Including 8’ <br />Up to 4’ 2-1/2” x 12 Ga. 3” x 12 Ga. 3” x 12 Ga. <br />4’1” to 6’ 3” x 12Ga. 4” x 11 Ga. 4” x 11 Ga. <br />6’1” to 8’ 3” x 12 Ga. 4” x 11 Ga. 6” x 3/16” <br />8’1” to 10’ 4” x 11 Ga. 6” x 3/16” 6” x 3/16” <br />10’1” to 12’ 4” x 11 Ga. 6” x 3/16” 6” x 3/16” <br />12’1” to 14’ 4” x 11 Ga. 6” x 3/16” 6” x 3/16” <br />14’1” to 16’ 6” x 3/16” 6” x 3/16” 6” x 3/16” <br />E.