Laserfiche WebLink
ST. BARBARA CATHOLIC SCHOOL TASK 2 75-24272-01 <br />DIOCESE OF ORANGE SEPTEMBER 12TH, 2024 <br />SANTA ANA, CA BID & PERMIT SET <br /> <br />STORM DRAINAGE 334100 - 3 <br />2. Do not proceed with utility interruptions without receiving Architect's written permis- <br />sion. <br />PART 2 - PRODUCTS <br />2.1 2.1 MANUFACTURERS <br />A. A.In other Part 2 articles where titles below introduce lists, the following requirements apply to <br />product selection: <br />1. Available Manufacturers: Subject to compliance with requirements, manufacturers <br />offering products that may be incorporated into the Work include, but are not limited to, <br />manufacturers specified. <br />2.2 2.2 PVC PIPE AND FITTINGS <br />A. A.PVC Sewer Pipe and Fittings, NPS 15and Smaller: ASTM D 3034, SDR 35, with bell-and- <br />spigot ends for gasketed joints with ASTM F 477, elastomeric seals. <br />B. B. PVC Sewer Pipe and Fittings, NPS 18and Larger: ASTM F 679, T-1 wall thickness, with <br />bell-and-spigot ends for gasketed joints with ASTM F 477, elastomeric seals. <br />C. C. PVC Sewer Pipe and Fittings: Schedule 40 ASTM D 1785 and D 2665 with solvent <br />cement joints conforming to ASTM D 2564. <br />2.3 REINFORCED CONCRETE PIPE AND FITTINGS <br /> <br />A. Reinforced Concrete Pipe: Comply with Section 207-2 of the Standard Specifications for Public <br />Works Construction. <br />A. B Tongue and Groove Piping: ASTM C76 (ASTM C76M), Class III, Wall B, for gasketed <br />joints. <br />B. Gaskets: ASTM C443 (ASTM C443M), rubber. <br />2.4 2.4 NONPRESSURE-TYPE PIPE COUPLINGS <br />A. Comply with ASTM C 1173, elastomeric, sleeve-type, reducing or transition coupling, for <br />joining underground non-pressure piping. Include ends of same sizes as piping to be joined and <br />corrosion-resistant-metal tension band and tightening mechanism on each end. <br />B. Sleeve Materials: <br />1. For Cast-Iron Soil Pipes: ASTM C 564, rubber. <br />2. For Plastic Pipes: ASTM F 477, elastomeric seal or ASTM D 5926, PVC.