My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
26 Civic Center Plz - REV 6 - Plan
PBA
>
Building
>
ProjectDox
>
C
>
Civic Center Plz
>
26 Civic Center Plz
>
26 Civic Center Plz - REV 6 - Plan
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
2/25/2026 1:27:25 PM
Creation date
2/25/2026 1:26:58 PM
Metadata
Fields
Template:
Plan
Permit Number
20181364
20184057
30146548
40138556
40139543
101117272
101117273
101117274
101117275
101117276
101117286
101120941
101121751
Full Address
26 Civic Center Plz
Street Number
26
Street Name
Civic Center
Street Suffix
Plz
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
200
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
City of Santa Ana Public Library Renovation <br />Group 4 Architecture Research + Planning, Inc.Smith, Fause & McDonald Inc. <br />Group 4 Project No. 22575-01 Conform Set – August 2, 2024Bid Set Addendum-03 – June 05 <br />INTEGRATED AUDIOVISUAL SYSTEMS AND EQUIPMENT SECTION 27 4116-7 <br />d.Analog NTSC Video Signal to Noise Ratio: at least 65 dB. <br />e.Analog RGBHV Video Signal to Noise Ratio: at least 58 dB. <br />f.Analog Video Differential Phase and Gain: no more than 0.5 degrees and 0.5 <br />percent, respectively. <br />g.Analog and Digital Video Signal to Crosstalk Ratio: at least 50 dB. <br />h.Analog Video Timing; no more than .25 degrees variation at 3.58 MHz <br />between any two parallel lines to the same location. <br />3.Projection Systems: <br />a.Consistent with performance of specified projectors and screens. <br />b.Brightness, convergence per ANSI standard procedures for device. <br />B.System Gain/Levels <br />1.Maintain consistent signal levels throughout the Project for each type of signal <br />carried. Patch points shall be unity gain, "flat" equalization, unless specifically noted <br />otherwise herein or on the drawings. The reference signal levels shall be; <br />a.Analog Video; 1.0 Volt peak to peak composite signal, sync tip to peak white, <br />defined as "100 IRE", or "100% signal". <br />b.TV RF; 1000 microVolts, defined as "0 dBmV" <br />c.Digital Audio, Line Level; -20 dbfs, defined as "0 VU" <br />d.Analog Audio, Line Level; +4 dBu, defined as "0 VU" <br />e.Analog Audio, Microphone Level; -50 dBm, 150 ohms <br />f.Analog Audio, Speaker Level; Greater than +20 dBm <br />g.Data and Control; As defined by the specification for the signal carried, e.g., <br />RS-232, RS-422 or any other such appropriate standard. <br />C.Masking <br />1.Masking sound level, following Contractor's level and signal equalization <br />1/3 Octave Band Sound Pressure Level and <br />maximum permitted <br />variance (dB) below ceiling <br />tile <br />50 Hz:47.0 (+4/-6) dB <br />63 Hz:47.0 (+4/-5) dB <br />80 Hz:47.0 (± 4) dB <br />100 Hz:47.0 (± 3) dB <br />125 Hz:47.0 (± 3) dB <br />160 Hz:46.0 (± 3) dB <br />200 Hz:45.0 (± 2) dB <br />250 Hz:44.0 (± 2) dB <br />315 Hz:42.7 (± 2) dB <br />400 Hz:41.3 (± 2) dB <br />500 Hz:40.0 (± 2) dB <br />630 Hz:38.3 (± 2) dB <br />800 Hz:36.7 (± 2) dB <br />1000 Hz:35.0 (± 2) dB <br />1250 Hz:33.3 (± 2) dB <br />1600 Hz:31.7 (± 2) dB <br />2000 Hz:30.0 (± 2) dB <br />2500 Hz:28.3 (± 2) dB
The URL can be used to link to this page
Your browser does not support the video tag.