My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
26 Civic Center Plz - REV 6 - Plan
PBA
>
Building
>
ProjectDox
>
C
>
Civic Center Plz
>
26 Civic Center Plz
>
26 Civic Center Plz - REV 6 - Plan
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
2/25/2026 1:27:25 PM
Creation date
2/25/2026 1:26:58 PM
Metadata
Fields
Template:
Plan
Permit Number
20181364
20184057
30146548
40138556
40139543
101117272
101117273
101117274
101117275
101117276
101117286
101120941
101121751
Full Address
26 Civic Center Plz
Street Number
26
Street Name
Civic Center
Street Suffix
Plz
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
200
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
City of Santa Ana Public Library Renovation <br />Group 4 Architecture Research + Planning, Inc.Smith, Fause & McDonald Inc. <br />Group 4 Project No. 22575-01 Conform Set – August 2, 2024Bid Set Addendum-03 – June 05 <br />INTEGRATED AUDIOVISUAL SYSTEMS AND EQUIPMENT SECTION 27 4116-69 <br />A.Inspection <br />1.General: Examine surfaces and rough framing to determine suitability to install <br />screen and mount. Do not start work until unsatisfactory conditions are corrected. <br />B.Installation <br />1.Install screen and projector mount horizontal and plumb for proper operation per <br />manufacturer's recommendations. Securely anchor to supporting structure to <br />withstand all loading conditions and strain of service. <br />C.Adjustment <br />1.Adjust units as required for smooth operation and alignment as required. <br />2.Just prior to final acceptance of project, clean the screen surface according to the <br />manufacturer's instructions. <br />3.Protect completed work from damage until acceptance by the City's Representative. <br />3.11 LOUDSPEAKER ASSEMBLY INSTALLATION <br />A.Loudspeakers: <br />1.Verify proper installation of loudspeaker enclosures and related support. <br />2.Verify that no loudspeaker assembly is subjected to stresses or loading effects in any <br />way contributing to possible extraordinary failure. <br />3.12 VIDEO PROJECTOR ASSEMBLY INSTALLATION <br />A.Design, engineer and provide complete, all means of support, suspension, attachment, <br />fastening, bracing, and restraint (hereinafter "support") of such equipment. Provide <br />engineering of such support by parties licensed to perform work of this type in the Project <br />jurisdiction. Submit in timely manner. <br />B.Comply with applicable Code and the requirements of the Authorities having jurisdiction. <br />C.Provide safety factor greater than six (6) or as required by Code, whichever is greater. <br />D.Mountings shall: <br />1.Permit projector lens to align with top of projection screen. <br />2.Permit Video Projector to be re-oriented at least plus or minus 3o from angles shown <br />on the Contract Drawings for optimum picture. <br />3.Maintain precise location and orientation of Video Projector after such adjustment <br />when subject to normal building motion and Code defined seismic induced building <br />motion. <br />E.Do not apply any load to building structure without first obtaining written approval of the City’s <br />Representative. Obtain per Project procedures. <br />F.During Acceptance Testing, adjust orientation of Video Projector as directed to achieve <br />optimum picture. Provide workers and ladders as required. Perform such adjustment with no <br />claim for additional cost or time. <br />3.13 PERMANENTLY INSTALLED MICROPHONES <br />A.General <br />1.Orient generally as shown in the plans with respect to area of intended pickup. <br />B.Ceiling Mount Microphones
The URL can be used to link to this page
Your browser does not support the video tag.