|
0 5'
<br />GRAPHIC SCALES:
<br />Issue Date
<br />1/16" = 1'-0"
<br />50'
<br />1/8" = 1'-0"1/4" = 1'-0"1/2" = 1'-0"3/4" = 1'-0"1" = 1'-0"1-1/2" = 1'-0"3" = 1'-0"
<br />0 5'25'0 1'12'0 1'6'0 4'0 3'1'0 2'0 1'
<br />Chckd By
<br />Drwn By
<br />Scale
<br />Building ID:
<br />KP Proj. No.
<br />Permit No.
<br />Sheet
<br />SheetsOf
<br />Sheet Title
<br />Project
<br />Facility
<br />This document is the property of the Owner and is
<br />Project Architect Approval:
<br />Architect/Engineer Of Record:
<br />IF THIS SHEET IS NOT 30"x42" , IT IS
<br />A REDUCED PRINT - SCALE ACCORDINGLY
<br />National Facilities Services
<br />Post Office Box 12916
<br />Oakland California 94604
<br />not to be used without owner's written permission.
<br />Floor Lev:Section:
<br />Revisions
<br />By Appr.
<br />HGW Proj. No.
<br />©
<br />A
<br />R
<br />C
<br />H
<br />I
<br />T
<br />E
<br />C
<br />T
<br />S
<br />
<br />h
<br />a
<br />n
<br />n
<br />a
<br />
<br />g
<br />a
<br />b
<br />r
<br />i
<br />e
<br />l
<br />
<br />w
<br />e
<br />l
<br />l
<br />s
<br />,
<br />
<br />a
<br />l
<br />l
<br />
<br />r
<br />i
<br />g
<br />h
<br />t
<br />s
<br />
<br />r
<br />e
<br />s
<br />e
<br />r
<br />v
<br />e
<br />d
<br />.
<br />
<br />
<br />A
<br />n
<br />y
<br />
<br />u
<br />s
<br />e
<br /> w
<br />i
<br />t
<br />h
<br />o
<br />u
<br />t
<br />
<br />p
<br />e
<br />r
<br />m
<br />i
<br />s
<br />s
<br />i
<br />o
<br />n
<br />
<br />i
<br />s
<br />
<br />e
<br />x
<br />p
<br />r
<br />e
<br />s
<br />s
<br />l
<br />y
<br />
<br />p
<br />r
<br />o
<br />h
<br />i
<br />b
<br />i
<br />t
<br />e
<br />d
<br />.
<br />
<br />
<br />P
<br />l
<br />o
<br />t
<br />t
<br />e
<br />d
<br />1955 Bacon Street. San Diego, CA 92107
<br />Office 619 523 8487
<br />www.hgwarchitecture.com
<br />KAISER PERMANENTE
<br />BUILDINGS ON BRAND
<br />1/
<br />2
<br />1
<br />/
<br />2
<br />0
<br />2
<br />6
<br />
<br />5
<br />:
<br />2
<br />3
<br />:
<br />5
<br />1
<br />
<br />P
<br />M
<br />01/23/2026
<br />Checker
<br />Author
<br />CAP030945
<br />T100
<br />CALGREEN - NONRESIDENTIAL
<br />MANDATORY MEASURES
<br />Santa Ana Medical Offices
<br />1900 E. 4th Street
<br />Santa Ana, CA, 92701
<br />PL
<br />A
<br />N
<br />
<br />C
<br />H
<br />E
<br />C
<br />K
<br />
<br />R
<br />E
<br />S
<br />U
<br />B
<br />M
<br />I
<br />T
<br />T
<br />A
<br />L
<br />2505
<br />SANTA ANA
<br />TABLE H-2TABLE H-2
<br />STANDARDS FOR COMMERCIAL PRE-RINSE SPRAY VALUES MANUFACTURED ON OR AFTER STANDARDS FOR COMMERCIAL PRE-RINSE SPRAY VALUES MANUFACTURED ON OR AFTER
<br />JANUARY 28, 2019JANUARY 28, 2019
<br />PRODUCT CLASS [spray force in ounce force (ozf)]MAXIMUM FLOW RATE (gpm)
<br />Product Class 1 (≤5.0 ozf)1.00
<br />Product Class 2 (> 5.0 ozf and ≤8.0 ozf)1.20
<br />Product Class 3 (> 8.0 ozf)1.28
<br />TABLE 5.106.5.4.1 RACEWAY CONDUIT AND PANEL POWER REQUIREMENTS FOR MEDIUM- AND HEAVY-DUTY EVSE [N]TABLE 5.106.5.4.1 RACEWAY CONDUIT AND PANEL POWER REQUIREMENTS FOR MEDIUM- AND HEAVY-DUTY EVSE [N]
<br />BUILDING TYPE BUILDING SIZE (SQ. FT.)NUMBER OF OFF-STREET
<br />LOADING SPACES
<br />ADDITIONAL CAPACITY REQUIRED
<br />(KVA) FOR RACEWAY & BUSWAY
<br />AND TRANSFORMER & PANEL
<br />Grocery 10,000 to 90,000 1 or 2 200
<br />3 or Greater 400
<br />Greater than 90,000 1 or Greater 400
<br />Retail 10,000 to 135,000 1 or 2 200
<br />3 or Greater 400
<br />Greater than 135,000 1 or Greater 400
<br />Warehouse
<br />20,000 to 256,000 1 or 2 200
<br />3 or Greater 400
<br />Greater than 256,000 1 or Greater 400
<br />1. IESNA Lighting Zones 0 and 5 are not applicable; refer to Lighting Zones as defined in the California Energy Code
<br />and Chapter 10 of the Callifornia Administrative Code.
<br />2. For property lines that abut public walkways, bikeways, plazas and parking lots, the property line may be
<br />considered to be 5 feet beyond the actual property line for purpose of determining compliance with this section.
<br />For property lines that abut public roadways and public transit corridors, the property line may be considered to be
<br />the centerline of the public roadway or public transit corridor for the purpose of determining compliance with this
<br />section.
<br />3. General lighting luminaires in areas such as outdoor parking, sales or storage lots shall meet these reduced
<br />ratings. Decorative luminaries located in these areas shall meet U-value limits for "all other outdoor lighting"
<br />chapter 3 - green building
<br />section 301 general
<br />301.1 scope301.1 scope . Buildings shall be designed to include the green building measures specified as mandatory in the
<br />application checklists contained in this code. Voluntary green building measures are also included in the application
<br />checklists and may be included in the design and construction of structures covered by this code, but are not required
<br />unless adopted by a city, county, or city and county as specified in Section 101.7.
<br />301.3 nonresidential additions and alterations301.3 nonresidential additions and alterations . The provisions of individual sections of Chapter 5 apply to newly
<br />constructed buildings, building additions of 1,000 square feet or greater, and/or building alterations with a permit valuation
<br />of $200,000 or above (for occupancies within the authority of California Building Standards Commission). Code sections
<br />relevant to additions and alterations shall only apply to the portions of the building being added or altered within the scope
<br />of the permitted work. A code section will be designated by a banner to indicate where the code section only applies to
<br />newly constructed buildings [N] or to additions and/or alterations [A]. When the code section applies to both, no banner
<br />will be used.
<br />301.3.1 nonresidential additions and alterations that cause updates to plumbing fixtures only:301.3.1 nonresidential additions and alterations that cause updates to plumbing fixtures only:
<br />Note: Note: On and after January 1, 2014, certain commercial real property, as defined in Civil Code Section 1101.3, shall
<br />have its noncompliant plumbing fixtures replaced with appropriate water-conserving plumbing fixtures under specific
<br />circumstances. See Civil Code Section 1101.1 for definitions, types of commercial real property affected, effective
<br />dates, circumstances necessitating replacement of noncompliant plumbing fixtures, and duties and responsibilities for
<br />compliance.
<br />301.3.2 waste diversion. 301.3.2 waste diversion. The requirements of Section 5.408 shall be required for additions and alterations whenever
<br />a permit is required for work.
<br />301.4 public schools and community colleges301.4 public schools and community colleges
<br />301.5 health facilities301.5 health facilities
<br />section 302 mixed occupancy buildings
<br />302.1 mixerd occupancy buildings.302.1 mixerd occupancy buildings. In mixed occupancy buildings, each portion of a buildingshall comply with the
<br />specific green building measures applicable to each specific occupancy.
<br />section 303 phased projects
<br />303.1 phased projects.303.1 phased projects. For shell buildings and others constructed for future tenant improvements, only those code
<br />measures relevant to the building components and systems considered to be new construction (or newly constructed) shall
<br />apply.
<br />303.1.1 Initial Tenant improvements.303.1.1 Initial Tenant improvements. The provisions of this code shall apply only to the initial tenant improvements to a
<br />project. Subsequent tenant improvements shall comply with the scoping provisions in Section 301.3 non-residential
<br />additions and alterations.
<br />abbreviations definitions:abbreviations definitions:
<br />HCD department of housing and community development
<br />BSC california building standards commission
<br />DSA-SS division of the state architect, structural safety
<br />OSHPD office of statewide health planning and development
<br />LR low rise
<br />HR high rise
<br />AA additions and alterations
<br />N new
<br />2 0 2 2 c a l g r e e n ( C G B S C ) n o t e s
<br />chapter 5 - nonresidential mandatory measures
<br />section 5.101 general
<br />5.101.1 scope5.101.1 scope . The provisions of this chapter outline planning, design and development methods that include
<br />environmentallyresponsible site selection, building design, building siting and development to protect, restore and enhance
<br />the environmental quality of the site and respect the integrity of adjacent properties.
<br />section 5.102 definitions
<br />5.102.1 definitions. 5.102.1 definitions. The following terms are defined in Chapter 2 (and are included here for reference)
<br />cutoff luminaires.cutoff luminaires. Luminaires whose light distribution is such that the candela per 1000 lamp lumens does not numerically
<br />exceed 25 (2.5 percent) at an angle of 90 degrees above nadir, and 100 (10 percent) at a vertical angle of 80 degrees above
<br />nadir. This applies to all lateral angles around the luminaire.
<br />low-emitting and fuel efficient vehicles.low-emitting and fuel efficient vehicles. eligible vehicles are limited to the following:
<br />1. Zero emission vehicle (ZEV), enhanced advanced technology PZEV (enhanced AT ZEV) or transitional zero
<br />emission vehicles (TZEV) regulated under CCR, Title 13, Section 1962.
<br />2. High-efficiency vehicles, regulated by U.S. EPA, bearing a fuel economy and greenhouse gas rating od 9 oe 10 as
<br />regulated under 40 CFR Section 600 Subpart D.
<br />neighborhood electric vehicle.neighborhood electric vehicle. A motor vehicle that meets the definition of "low-speed vehicle" either in Section 385.5 of
<br />the Vehicle Code or in 49CFR571.500 (as it existed on July 1, 2000), and is certified to zero-emission vehicle standards.
<br />tenant-occupants. tenant-occupants. Building occupants who inhabit a building during its normal hours of operation as permanent
<br />occupants, such as employees, as distinguished from customers and other transient visitors.
<br />vanpool vehicle.vanpool vehicle. Eligible vehicles are limited to any motor vehicle, other than a motortruck or truck tractor, designed for
<br />carrying more than 10 but not more than 15 persons including the driver, which is maintained and used primarily for the
<br />nonprofit work-related transportation of adults for the purpose of ridesharing.
<br />Note: Note: Source: Vehicle Code, Division 1, Section 668
<br />zev.zev. Any vehicle certified to zero-emission standards.
<br />section 5.106 site development
<br />5.106.1 storm water pollution prevention for projects that distrub less than one acre of land. 5.106.1 storm water pollution prevention for projects that distrub less than one acre of land. Newly constructed
<br />projects and additions which disturb less than one acre of land, and are not part of a larger common plan of development or
<br />sale, shall prevent the pollution of storm water runoff from the construction activities through one or more of the following
<br />measures:
<br />5.106.1.1 local ordinance. 5.106.1.1 local ordinance. Comply with a lawfully enacted storm water management and/or erosion control
<br />ordinance.
<br />5.106.1.2 best management practices (BMPs).5.106.1.2 best management practices (BMPs). Prevent the loss of soil through wind or water erosion by
<br />implementing an effective combination of reosion and sediment control and good housekeeping BMPs.
<br />1. Soil loss BMPs that should be considered for implementation as appropriate for each project include, but are not
<br />limited to, the following:
<br />a. Scheduling construction activity during dry weather, when possible.
<br />b. Preservation of natural features, vegetation, soil, and buffers around surface waters.
<br />c. Drainage swales or lined ditches to control stormwater flow.
<br />d. Mulching or hydroseeding to stabilize disturbed soils.
<br />e. Erosion control to protect slopes.
<br />f. Protection of storm drain inlets (gravel bags or catch basin inserts).
<br />g. Perimeter sediment control (perimeter silt fence, fiber rolls).
<br />h. Sediment trap or sediment basin to retain sediment on site.
<br />i. Stabilized construction exits.
<br />j. Wind erosion control.
<br />k. Other soil loss BMPs acceptable to the enforcing agency.
<br />2. Good housekeeping BMPs to manage construction equipment, materials, non-stormwater discharges and wastes
<br />that should be considered for implementation as appropriate for each project include, but are not limited to, the
<br />following:
<br />a. Dewaterign activities.
<br />b. Material handling and waste management.
<br />c. Building materials stockpile management.
<br />d. Management of washout areas (concrete, paints, stucco, etc.).
<br />e. Control of vehicle/equipment fueling to contractor's staging area.
<br />f. Vehicle and equipment cleaning performed off site.
<br />g. Spill prevention and control.
<br />h. Other housekeeping BMPs acceptable to the enforcing agency.
<br />5.106.2 stormwater pollution prevention for projects that distrub one or more acres of land. 5.106.2 stormwater pollution prevention for projects that distrub one or more acres of land. Comply with all lawfully
<br />enacted stormwater discharge regulations for projects that (1) disturb one acre or more of land, or (2) disturb less than one
<br />acre of land but are part of a larger common plan of development sale.
<br />Note: Note: Projects that (1) disturb one acre or more of land, or (2) disturb less than one acre of land but are part of the larger
<br />common plan of development or sale must comply with the post-construction requirements detailed in the applicable
<br />National Pollutant Discharge Elimination System (NPDES) General permit for Stormwater Discharges Associated with
<br />Construction and Land Disturbance Activities issued by the State Water Resources Control Board or the Lahontan Regional
<br />Water Quality Control Board (for projects in the Lake Tahoe Hydrologic Unit).
<br />The NPDES permits require postconstruction runoff (post-project hydrology) to match the preconstruction runoff (pre-
<br />project hydrology) with the installation of postconstruction stormwater management measures. The NPDES permits
<br />emphasize runoff reduction through on-site stormwater use, interception, evapotranspiration, and infiltration through
<br />nonstructural controls, such as Low Impact Development (LID) practices, and conversation design measures. Stormwater
<br />volume that cannot be addressed using nonstructural practices is required to be captured in structural practices and be
<br />approved by the enforcing agency.
<br />Refer to the current applicable permits on the State Water Resources Control Board website at:
<br />www.waterboards.ca.gov/constructionstormwater. Consideration to the stormwater runoff management measures should be
<br />given during the initial design process for appropriate integration into site development.
<br />5.106.4 bicycle parking. 5.106.4 bicycle parking. For buildings within the authority of California Building Standards Commission asspecified in
<br />Section 103, comply with Section 5.106.4.1. For buildings within the authority of the Division of the State Architect
<br />pursuant to Section 105, comply with Section 5.106.4.2
<br />5.106.4.1 bicycle parking.5.106.4.1 bicycle parking. Comply with Sections 5.106.4.1.1 and 5.106.4.1.2; or meet the applicable local
<br />ordinance, whichever is stricter.
<br />5.106.4.1.1 Short-term bicycle parking. 5.106.4.1.1 Short-term bicycle parking. If the new project or an addition or alteration is anticipated to generate
<br />visitor traffic, provide permanently anchored bicycle racks within 200 feet of the visitors' entrance, readily visible
<br />to passers-by, for 5% of new visitor motorized vehicle parking spaces being added, with a minimym of one two-
<br />bike capacity rack.
<br />Exception: Exception: Additions or alterations which add nine or less visitor vehicular parking spaces.
<br />5.106.4.1.2 long-term bicycle parking.5.106.4.1.2 long-term bicycle parking. For new buildings with tenant spaces that have 10 or more tenant-
<br />occupants, provide secure bicycle parking for 5 percent of the tenant-occupant vehicular parking spaces with a
<br />minimum of one bicycle parking facility.
<br />5.106.4.1.3 5.106.4.1.3 For additions or alterations that add 10 or more tenant-occupant vehicular parking spaces, provide
<br />secure bicycle parking for 5 percent of the tenant vehicular parking spaces being added, with a minimum of one
<br />bicycle parking facility.
<br />1.
<br />a.
<br />b.
<br />c.
<br />2.
<br />1.
<br />2.
<br />3.
<br />4.
<br />5.106.4.1.45.106.4.1.4 For new shell buildings in phased projects provide secure bicycle parking for 5 percent of the
<br />anticipated tenant-occupant vehicular parking spaces with a minimum of one bicycle parking facility.
<br />5.106.4.1.55.106.4.1.5 Acceptable bicycle parking facility for Sections 5.106.4.1.2, 5.106.4.1.3, and 5.106.4.1.4 shall be
<br />convenient from the street and shall meet one of the following:
<br />1. Covered, lockable enclosures with permanently anchored racks for bicycles;
<br />2. Lockable bicycle rooms with permanently anchored racks; or
<br />3. Lockable, permanently anchored bicycle lockers.
<br />5.106.4.2 bicycle parking.5.106.4.2 bicycle parking. For public schools and community colleges, comply with Sections 5.106.4.2.1 and
<br />5.106.4.2.2
<br />5.106.4.2.1 student bicycle parking.5.106.4.2.1 student bicycle parking. provide permanently anchored bicycle racks conveniently accessed with a
<br />minimum of four two-bike capacity racks per new building.
<br />5.106.4.2.2 staff bicycle parking.5.106.4.2.2 staff bicycle parking. Provide permanent, secure bicycle parking conveniently accessed with a
<br />minimum of two staff bicycle parking spaces per new building. Acceptable bicycle parking facilities shall be
<br />convenient from the street or staff parking area and shall meet one of the following:
<br />1. Covered, lockable enclosures with permanently anchored racks for bicycles;
<br />2. Lockable bicycle rooms with permanently anchored racks; or
<br />3. Lockable, permanently anchored bicycle lockers.
<br />5.106.5.3 electric vehicle (EV) charging. 5.106.5.3 electric vehicle (EV) charging. [N] Construction to provide electric vehicle infrastructure and facilitate
<br />electric vehicle charging shall comply with Section 5.106.5.3.1 and shall be provided in accordance with regulations
<br />in the California Building Code and the California Electrical Code.
<br />exceptions:exceptions:
<br />On a case-by-case basis where the local enforcing agency has determined compliance with this section
<br />is not feasible based upon one of the following conditions:
<br />Where there is no local utility power supply
<br />Where the local utility is unable to supply adequate power.
<br />Where there is evidence suitable to the local enforcement agency substantiating the local utility
<br />infrastructure design requirements, directly related to the implementation of Section 5.106.5.3,
<br />may adversely impact the construction cost of the project.
<br />Parking spaces accessible only by automated mechanical car parking systems are not required to
<br />comply with this code section
<br />5.106.5.3.1 EV capable spaces. [N] 5.106.5.3.1 EV capable spaces. [N] ] EV capable spaces shall be provided in accordance with Table 5.106.5.3.1
<br />and the following requirements.
<br />Raceways complying with the California Electrical Code and no less that 1-inch (25 mm) diameter shall
<br />be provided and shall originate at a service panel or a subpanel(s) serving the area, and shall terminate
<br />in close proximity to the proposed location of the EV capable and into a suitable listed cabinet,
<br />box,enclosure or equivalent. A common raceway may be used to serve multiple EV charging spaces.
<br />A service panel or subpanel (s) shall be provided with panel space and electrical load capacity for a
<br />dedicated 208/240 volt, 40-ampere minimum branch circuit for each EV capable space, with delivery of
<br />30-ampere minimum to an installed EVSE at each EVCS.
<br />The electrical system and any on-site distribution transformers shall have sufficient capacity to supply
<br />full rated amperage at each EV capable space.
<br />The service panel or subpanel circuit directory shall identify the reserved overcurrent protective devices
<br />space(s) as "EV CAPABLE". The raceway termination location shall be permanently and visibly marked
<br />as "EV CAPABLE."
<br />Note:Note: A parking space served by electric vehicle supply equipment or designed as a future EV charging space
<br />shall count as at least one standard automobile parking space only for the purpose of complying with any
<br />applicable minimum parking space requirements established by an enforcement agency. See vehicle Code
<br />Section 22511.2 for further details.
<br />TABLE 5.106.5.3.1TABLE 5.106.5.3.1
<br />TOTAL NUMBER OF ACTUAL
<br />PARKING SPACES
<br />NUMBER OF REQUIRED EV
<br />CAPABLE SPACES
<br />NUMBER OF EVCS (EV CAPABLE SPACES
<br />PROVIDED WITH EVSE)^2
<br />0-9 0 0
<br />10-25 2 0
<br />26-50 8 2
<br />51-75 13 3
<br />76-100 17 4
<br />101-150 25 6
<br />151-200 35 9
<br />201 AND OVER 20% of total ¹25% of EV capable spaces ¹
<br />1.
<br />2.
<br />Where there is insufficient electrical supply.
<br />The number of required EVCS (EV capable spaces provided with EVSE) in column 3 count towards
<br />the total number of required EV capable spaces shown in column 2.
<br />1.
<br />a.
<br />b.
<br />c.
<br />1.
<br />2.
<br />3.
<br />4.
<br />5.106.5.3.2 electric vehicle charging stations (EVCS) 5.106.5.3.2 electric vehicle charging stations (EVCS) EV capable spaces shall be provided with EVSE to create
<br />EVCS in the number indicated in Table 5.106.5.3.1. The EVCS required by Table 5.106.5.3.1 may be provided with
<br />EVSE in any combination of Level 2 and Direct Current Fast Charging (DCFC), except that at least one Level 2
<br />EVSE shall be provided.
<br />One EV charger with multiple connectors capable of charging multiple EVs simultaneously shall be permitted if the
<br />electrical load capacity required by Section 5.106.5.3.1 for each EV capable space is accumulatively supplied to
<br />the EV charger.
<br />The installation of each DCFC EVSE shall be permitted to reduce the minimum number of required EV capable
<br />spaces without EVSE by five and reduce proportionally the required electrical load capacity to the service panel or
<br />subpanel.
<br />5.106.5.3.3 use of automatic load management systems (ALMS). 5.106.5.3.3 use of automatic load management systems (ALMS). ALMS shall be permitted for EVCS. When
<br />ALMS is installed, the required electrical load capacity specified in seciton 5.106.5.3.1 for each EVCS may be
<br />reduced when serviced by an EVSE controlled by an ALMS. Each EVSE controlled by an ALMS shall deliver a
<br />minimum 30 amperes to an EV when charging one vehicle and shall deliver a minimum 3.3 kW while
<br />simultaneously charging multiple EVs.
<br />5.106.5.3.4 accessible EVCS. 5.106.5.3.4 accessible EVCS. When EVSE is installed, accessible EVSC shall be provided in accordance with the
<br />California Building Code, Chapter 11B, Section 11B-228.3.
<br />Note: Note: For EVCS signs, refer to Caltrans Traffic Operations Policy Directive 13-01 (Zero Emission Vehicle Signs
<br />and Pavement Markings) or its successor(s).
<br />5.106.5.4 electric vehicle (EV) charging: medium-duty and heavy-duty. [N] 5.106.5.4 electric vehicle (EV) charging: medium-duty and heavy-duty. [N] Construction shall comply with section
<br />5.106.5.4.1 to facilitate future installation of electric vehicle supply equipment (EVSE). Construction for warehouses,
<br />grocery stores and retail stores with planned off-street loading spaces shall also comply with Section 5.106.5.4.1 for
<br />future installation of medium- and heavy-duty EVSE.
<br />Exceptions:Exceptions:
<br />On a case-by-case basis where the local enforcing agency has determined compliance with this section is not
<br />feasible based upon one of the following conditions:
<br />Where there is no local utility power supply.
<br />Where the local utility is unable to supply adequate power.
<br />Where there is evidence suitable to the local enforcing agency substantiating that additional local utility
<br />infrastructure design requirements, directly related to the implementation of Section 5.106.5.3, may
<br />adversely impact the construction cost of the project.
<br />When EVSE(s) is/are installed, it shall be in accordance with the California Building Code, the California Electrical
<br />Code and as follows:
<br />5.106.5.4.1 Electric vehicle charging readiness requirements for warehouse, grocery stores and retail stores 5.106.5.4.1 Electric vehicle charging readiness requirements for warehouse, grocery stores and retail stores
<br />with planned off-street loading spaces. [N] with planned off-street loading spaces. [N] In order to avoid future demolition when adding EV charging supply
<br />and distribution equipment, spare raceways(s) or busway(s) and adequate capacity for transformers(s), service
<br />panels(s) or subpanel(s) shall be installed at the time of construction in accordance with the California Electrical
<br />Code. Construction plans and specifications shall include but are not limited to, the following:
<br />The transformer, main service equipment and subpanel shall meet the minimum power requirement in
<br />Table 5.106.5.4.1 to accommodate the dedicated branch circuits for the future installation of EVSE.
<br />The construction documents shall indicate on or more location(s) convenient to the planned offstreet
<br />loading space(s) reserved for medium-and heavy-duty ZEV charging cabinets and charging dispensers,
<br />and a pathway reserved for routing of conduit from the termination of the raceway(s) or busway(s) to the
<br />charging cabinet(s) and dispenser(s) as shown in Table 5.106.5.4.1
<br />Raceway(s) or busway(s) originating at a main service panel or a subpanel(s) serving the area where
<br />potential future medium-and heavy-duty EVSE will be located and shall terminate in close proximity to
<br />the potential future location of the charging equipments for medium- and heavy-duty vehicles.
<br />The raceway(s) or busway(s) shall be sufficient size to carry the minimum additional system load to the
<br />future location of the charging for medium- and heavy-duty ZEVs as shown in Table 5.106.5.4.1.
<br />1.1.
<br />2.2.
<br />3.3.
<br />4.4.
<br />1.
<br />2.
<br />3.
<br />1.
<br />2.
<br />1.1.
<br />2.2.
<br />1.1.
<br />2.2.
<br />3.3.
<br />4.4.
<br />5.5.
<br />6.6.
<br />7.7.
<br />1.1.
<br />2.2.
<br />3.3.
<br />4.4.
<br />1.1.
<br />2.2.
<br />1.
<br />2.
<br />3.
<br />4.
<br />5.
<br />6.
<br />1.1.
<br />2.2.
<br />3.3.
<br />1.
<br />2.
<br />3.
<br />a.
<br />b.
<br />c.
<br />d.
<br />e.
<br />4.
<br />5.
<br />1.
<br />2.
<br />3.
<br />4.
<br />5.
<br />6.
<br />7.
<br />Identifies the construction and demolition waste materials to be diverted from disposal by efficient usage,
<br />recycling, reuse on the project or salvage for future use or sale.
<br />Determines if construction and demolition waste materials will be sorted on-site (source-separated) or bulk
<br />mixed (single stream).
<br />Identifies diversion facilities where construction and demolition waste material colleccted will be taken.
<br />Specifies that the amount of construction and demolition waste materials diverted shall be calculated by
<br />weight or volume, but not by both.
<br />5.408.1.2 waste management company. 5.408.1.2 waste management company. Utilize a waste management company that can provide verifiable documents
<br />that the percentage of construction and demolition waste magerial diverted from the landfill complies with this section.
<br />Note:Note: The owner or contractor shall make the determination if the constrution and demolition waste material will
<br />be diverted by a waste management company.
<br />Exceptions to Sections 5.408.1.1 and 5.408.1.2Exceptions to Sections 5.408.1.1 and 5.408.1.2
<br />Excavated soil and land-clearing debris.
<br />Alternate waste reduction methods developed by working with local agencies if diversion or recycle
<br />facilities capable of compliance with this item do not exist.
<br />Demolition waste meeting local ordinance or calculated in consideration of local recycling facilities and
<br />markets.
<br />5.408.1.3 waste stream reduction alternative. 5.408.1.3 waste stream reduction alternative. The combined wight of new construction disposal that does not exceed
<br />two pounds per square foot of building area may be deemed to meet the 65% minimum requirement as approved by the
<br />enforcing agency.
<br />5.408.1.4 documentation. 5.408.1.4 documentation. Documentation shall be provided to the enforcing agency which demonstrates compliance
<br />with Sections 5.408.1.1, through 5.408.1.3. The waste management paln shall be updated as necessary and shall be
<br />accessible during construction for examination by the enforcing agency.
<br />Notes:Notes:
<br />Sample forms found in "A Guide to the California Green Building Standards Code (Nonresidential)" located
<br />www.dgs.ca.gov/BSC/Resources/Page-Content/Building-Standards-Commission- Resources-List-
<br />Folder/CALGreen may be used to assist in documenting compliance with the waste management plan.
<br />Mixed construction and demolition debris processors can be located at the California Department of
<br />Resources Recycling and Recovery (CalRecycle).
<br />5.408.2 universal waste. [A] 5.408.2 universal waste. [A] Additions and alterations to a building or tenant space that meet the scoping provisions in
<br />Section 301.3 for nonresidential additions and alterations, shall require verification that Universal Waste items such as
<br />fluorescent lamps and ballast and mercury containing thermostats as well as other California prohibited Universal Waste
<br />materials are disposed of properly and are diverted from landfills. A list of prohibited Universal Waste materials shall be
<br />included in the construction documents.
<br />Note:Note: Refer to the Universal Waste Rule link at: http://www.dtsc.ca.gov/universalwaste/
<br />5.408.3 excavated soil and land clearing debris. 5.408.3 excavated soil and land clearing debris. 100 percent of trees, stumps, rocks and associated vegetation and soils
<br />resulting primarily from land clearing shall be reused or recycled. For a phased project, suchmaterial may be stockpiled on
<br />site until the storage site is developed.
<br />Exception: Exception: Reuse, either on or off-site, of vegetation or soil contaminated by disease or pest infestation.
<br />Notes: Notes:
<br /> If contamination by disease or pest infestation is suspected, contact the County Agricultural Commissioner
<br />and follow its direction for recycling or disposal of the material.
<br />For a map of know pest and/or disease quarantine zones, consult with the California Department of Food and
<br />Agriculture. (www.cdfa.ca.gov)
<br />section 5.410 building maintenance and operations
<br />5.410.1 recycling by occupants. 5.410.1 recycling by occupants. Provide readily accessible areas that serve the entire building and are identified for the
<br />depositing, storage and collection of non-hazardous materials for recycling, including (at a minimum) paper, corrugated
<br />cardboard, glass, plastics, organic waste, and metals or meet a lawfully enacted local recycling ordinance, if more
<br />restrictive.
<br />Exception:Exception: Rural jurisdictions that meet and apply for the exemption in Public Resources Code 42649.82 (a)(2)(A) et
<br />seq. shall also be exempt from the organic waste portion of this section.
<br />5.410.1.1 additions.5.410.1.1 additions. All additions conducted within a 12-month period under single or multiple permits, resulting in
<br />an increase of 30% or more in floor area, shall provide recycling areas on site.
<br />ExceptionException : Additions within a tenant space resulting in less than a 30% increase in the tenant space area.
<br />5.410.1.2 sample ordinance.5.410.1.2 sample ordinance. Space allocation for recycling areas shall comply with Chapter 18, Part 3, Division 30
<br />of the Public Resources Code. Chapter 18 is known as the California Solid Waste Reuse and Recycling Access Act of
<br />1991 (Act).
<br />Note: Note: A sample ordinance for use by local agencies may be found in Appendix A of the document at the CalRecycle’s
<br />web site.
<br />5.410.2 commissioning. [N] new buildings 10,000 squre feet and over. 5.410.2 commissioning. [N] new buildings 10,000 squre feet and over. For new buildings 10,000 square feet and over,
<br />building commissioning shall be included in the design and construction processes of the building project to verify that the
<br />building systems and components meet the owner’s or owner representative’s project requirements. Commissioning shall
<br />be performed in accordance with this section by trained personnel with experience on projects of comparable size and
<br />complexity. For I-occupancies that are not regulated by OSHPD or for I-occupancies and L-occupancies that are not
<br />regulated y the California Energy Code Section 100.0 Scope, all requirements in Sections 5.410.2 through 5.410.2.6 shall
<br />apply.
<br />Note:Note: For energy-related systems under the scope (Section 100) of the California Energy Code, including heating,
<br />ventilation, air conditioning (HVAC) systems and controls, indoor lighting systems and controls, as well as water
<br />heating systems and controls, refer to California Energy Code Section 120.8 for commissioning requirements
<br />Commissioning requirements shall include:
<br />Owner’s or Owner representative’s project requirements.
<br />Basis of design.
<br />Commissioning measures shown in the construciton documents.
<br />Commissioning plan.
<br />Functional performance testing.
<br />Documentation and training.
<br />Commissioning report.
<br />Exceptions:Exceptions:
<br />Unconditioned warehouses of any size.
<br />Areas less than 10,000 square feet used for offices or other conditioned accessory spaces within unconditioned
<br />warehouses.
<br />Tenant improvements less than 10,000 square feet as described in Section 303.1.1.
<br />Open parking garages of any size, or open parking garage areas, of any size, within a structure.
<br />Note: Note: For the purposes of this section, unconditioned shall mean a building, area, or room which does not provide
<br />heating and or air conditioning.
<br />Informational Notes: Informational Notes:
<br />IAS AC 476 is an accreditation criteria for organizations providing training and/or certification of commissioning
<br />personnel. AC 476 is available to the Authority Having Jurisdiction as a reference for qualifications of
<br />commissioning personnel. AC 476 des not certify individuals to conduct functional performance tests or to adjust
<br />and balance systems.
<br />Functional performance testing for heating, ventilation, air conditioning systems and lighting controls must be
<br />performed in compliance with the California Energy Code.
<br />5.410.2.1 owner's or owner representative's project requirements (OPR). [N]5.410.2.1 owner's or owner representative's project requirements (OPR). [N] The expectations and requirements of
<br />the building appropriate to its phase shall be documented before the design phase of the project begins. This
<br />documentation shall include the following:
<br />Environmental and sustainability goals.
<br />Building sustainable goals.
<br />Indoor environmental quality requirements.
<br />Project program, including facility functions and hours of operation, and need for after hours operation.
<br />Equipment and systems expectations.
<br />Building occupant and operation and maintenance (O&M) personnel expectations.
<br />5.410.2.2 basis of design (BOD). [N] 5.410.2.2 basis of design (BOD). [N] A written explanation of how the design of the building systems meets the OPR
<br />shall be completed at the design phase of the building project. The Basis of Design document shall cover the following
<br />systems:
<br />Renewable energy systems.
<br />Landscape irrigation systems.
<br />Water reuse system.
<br />5.410.2.3 commissioning plan. [N] 5.410.2.3 commissioning plan. [N] Prior to permit issuance a commissioning plan shall be completed to document
<br />how the project will be commissioned. The commissioning plan shall include the following:
<br />General project information.
<br />Commissioning goals.
<br />Systems to be commissioned. Plans to test systems and components shall include:
<br />An explanation of the original design intent.
<br />Equipment and systems to be tested, including the extent of tests.
<br />Functions to be tested.
<br />Conditions under which the test shall be performed.
<br />Measurable criteria for acceptable performance.
<br />Commissioning team information.
<br />Commissioning process activities, schedules and responsibilities. Plans for the completion of
<br />commissioning shall be included.
<br />5.410.2.4 functional performance testing. [N] 5.410.2.4 functional performance testing. [N] Functional performance tests shall demonstrate the correct
<br />installation and operation of each compnent, system and system-to-system interface in accordance with the approved
<br />plans and specificaiotns. Functional performance testing reports shall contain information addressing each of the
<br />bilding compnents tested, the testing methods utilized, and include any readings and adjustments made.
<br />5.410.2.5 documentation and training. [N] 5.410.2.5 documentation and training. [N] A Systems Manual and Systems Operations Training are required,
<br />including Occupational Safety and Health Act (OSHA) requirements in California Code of Regulations (CCR), Title 8,
<br />Section 5142, and other related regulations.
<br />5.410.2.5.1 systems manual. [N]5.410.2.5.1 systems manual. [N] Documentation of the operational aspects of the building shall be completed
<br />within the systems manual and delivered to the building owner or representative. The systems manual shall
<br />include the following:
<br />Site information, including facility description, history and current requirements.
<br />Site contact information.
<br />Basic operations and maintenance, including general site operating procedures, basic troubleshooting,
<br />recommended maintenance requirements, site events log.
<br />Major systems.
<br />Site equipment inventory and maintenance notes.
<br />A copy of verifications required by the enforcing agency or this code.
<br />Other resources and documentation, if applicable.
<br />TABLE 5.106.8 [N] MAXIMUM ALLOWABLE BACKLIGHT, UPLIGHT AND GLARE (BUG) RATINGSTABLE 5.106.8 [N] MAXIMUM ALLOWABLE BACKLIGHT, UPLIGHT AND GLARE (BUG) RATINGS 1,2
<br />ALLOWABLE RATING LIGHTING
<br />ZONE LZ0
<br />LIGHTING
<br />ZONE LZ1
<br />LIGHTING
<br />ZONE LZ2
<br />LIGHTING
<br />ZONE LZ3
<br />LIGHTING
<br />ZONE LZ4
<br />MAXIMUM ALLOWABLE BACKLIGHT RATING
<br />luminaire greater than 2 mounting heights (MH) from
<br />property line N/A No Limit No Limit No Limit No Limit
<br />luminaire back hemisphere is 1-2 MH from property
<br />line N/A B2 B3 B4 B4
<br />Luminaire back hemisphere is 0.5-1 MH from property
<br />line N/A B1 B2 B3 B3
<br />Luminaire back hemisphere is less than 0.5 MH from
<br />property line N/A B0 B0 B1 B2
<br />MAXIMUM ALLOWABLE UPLIGHT RATING (U)
<br />For area lighting 3 N/A U0 U0 U0 U0
<br />For all other outdoor lighting,including decorative
<br />luminaires N/A U1 U2 U3 UR
<br />MAXIMUM ALLOWABLE GLARE RATING 5(G)
<br />MAXIMUM ALLOWABLE GLARE RATING 5 (G)N/A G1 G2 G3 G4
<br />5 (G)N/A G0 G1 G1 G2
<br />5 (G)N/A G0 G0 G1 G1
<br />5 (G)N/A G0 G0 G0 G1
<br />MAXIMUM ALLOWABLE GLARE RATING
<br />MAXIMUM ALLOWABLE GLARE RATING
<br />MAXIMUM ALLOWABLE GLARE RATING
<br />1.
<br />2.
<br />3.
<br />1.
<br />2.
<br />3.
<br />4.
<br />5.
<br />1.
<br />2.
<br /> 5.106.8.1 facing- backlight [N]. 5.106.8.1 facing- backlight [N]. Luminaries within 2MH of a property line shall be oriented so that the nearest property
<br />line is behind the fixture, and shall comply with the backlight rating specified in Table 5.106.8 based on the lighting zone
<br />and distance to the nearest point of that property line.
<br />Exception: corners.Exception: corners. If two property lines (or two segments of the same property line) have equidistant point to the
<br />luminaire, then the luminaire may be oriented so that the intersection of the two lines (the corner) is directly behind the
<br />luminaire. The luminaire shall still use the distance to the nearest points(s) on the property lines to determine the
<br />required backlight rating.
<br />5.106.8.2 facing-glare. 5.106.8.2 facing-glare. For luminaires covered by 5.106.8.1, if a property line also exists within or extends into the front
<br />hemisphere within 2MH of the luminaire then the luminaire shall comply with the more stringent glare rating specified in
<br />Table 5.106.8 based on the lighting zone and distance to the nearest point on the nearest property line within the front
<br />hemisphere.
<br />Note: [N]Note: [N]
<br />See also California Building Code, Chapter 12, Section 1205.6 for college campus lighting requirements for
<br />parking facilities and walkways.
<br />Refer to Chapter 8 (Compliance Forms, Worksheets and Reference Material) for IES TM-15-11 Table A-1,
<br />California Energy Code Tables 130.2-A and 130.2-B
<br />Refer to the California Building Code for requirements for additions and alterations.
<br />5.106.10 grading and paving.5.106.10 grading and paving. Construction plans shall indicate how site grading or a drainage system will manage all
<br />surface water flows to keep water from entering buildings. Examples of methods to manage surface water include, but are
<br />not limited to, the following:
<br />Swales
<br />Water collection and disposal systems.
<br />French drains.
<br />Water retention gardens.
<br />Other water measures which keep surface water away from buildings and aid in groundwater recharge
<br />Exception:Exception: Additions and alterations not altering the drainage path.
<br />5.106.12 shade trees. 5.106.12 shade trees. Shade Trees shall be planted to comply with Sections 5.106.12.1, 5.106.12.2, and 5.106.12.3.
<br />Percentages shown shall be measured at noon on the summer solstice. Landscape irrigation necessary to establish and
<br />maintain tree health shall comply with Section 5.304.6.
<br />5.106.12.1 surface parking areas. 5.106.12.1 surface parking areas. Shade tree plantings, minimum #10 container size or equal, shall be installed to
<br />provide shade over 50 percent of the parking area within 15 years.
<br />Exceptions: Exceptions: Surface parking area covered by solar photovoltaic shade structures with roofing materials that comply
<br />with Table A5.106.11.2.2 in Appendix A5 shall be permitted in whole or in part in lieu of shade tree planting.
<br />5.106.12.2 landscape areas.5.106.12.2 landscape areas. Shade tress plantings, minimum #10 container size or equal shall be installed to
<br />provide shade of 20% of the landscape area within 15 years.
<br />Exceptions: Exceptions: Playfields for organized sport activity are not included in the total area calculation.
<br />5.106.12.3 hardscape areas.5.106.12.3 hardscape areas. Shade tree plantings, minimum #10 container size or equal shall be installed to provide
<br />shade over 20 percent of the hardscape area within 15 years.
<br />Exceptions: Exceptions:
<br />Walks, hardscape areas covered by solar photovoltaic shade structures or shade structures with roofing
<br />materials that comply with Table A5.106.11.2.2 in Appendix A5 shall be permitted in whole or in part in lieu
<br />of shade tree planting.
<br />Designated and marked play areas of organized sport activity are not included in the total area calculation.
<br />division 5.2 energy efficiency
<br />section 5.201 general
<br />5.201.1 scope5.201.1 scope . California Energy Code. For the purposes of mandatory energy efficiency standards in this code, the
<br />California Energy Commission will continue to adopt mandatory building standards.
<br />division 5.3 water efficiency and conservation
<br />section 5.301 general
<br />5.301.1 scope5.301.1 scope . The provisions of this chapter shall establish the means of conserving water use indoors, outdoors and in
<br />wastewater conveyance.
<br />section 5.302 definitions
<br />5.302.1 definitions.5.302.1 definitions. The following terms are defined in Chapter 2 (and are included here for reference)
<br />evapotranspiration adjustment factor (ETAF) [DSA-SS].evapotranspiration adjustment factor (ETAF) [DSA-SS].An adjustment factor when applied to reference evapotranspiration
<br />that adjusts for plant factors and irrigation efficiency, which ae two major influences on the amount of water that needs to be
<br />applied to the landscape.
<br />footprint area [DSA-SS]. footprint area [DSA-SS]. The total area of the furthest exterior wall of the structure projected to natural grade, not including
<br />exterior areas such as stairs, covered walkways, patios and decks.
<br />metering faucet. metering faucet. A self-closing faucet that dispenses a specific volume of water for each actuation cycle. The volume or
<br />cycle duration can be fixed or adjustable.
<br />graywater.graywater. Pursuant to Health and Safety Code Section 17922.12, "graywater" means untreated wastewater that has not been
<br />contaminated by any toilet discharge, has not been affected by infectious, contaminated, or unhealthy bodily wastes, and
<br />does not present a threat from contamination by unhealthful processing, manufacturing, or operating wastes. "Graywater"
<br />includes, but is not limited to wastewater from bathtubs, showers, bathroom washbasins, clothes washing machines and
<br />laundry tubs, but does not include waste water from kitchen sinks or dishwashers.
<br />model water efficient landscape ordinance (MWELO).model water efficient landscape ordinance (MWELO). The California ordinance regulating landscape design, installation
<br />and maintenance practices that will ensure commercial, multifamily and other developer installed landscapes greater than
<br />2500 square feet meet an irrigation water budget developed based on landscaped area and climatological parameters.
<br />model water efficient landscape ordinance (MWELO). [HCD]model water efficient landscape ordinance (MWELO). [HCD] The California model ordinance (California Code of
<br />Regulations, Title 23, Division 2, Chapter 2.7), regulating landscape design, installation and maintenance practices. Local
<br />agencies are required to adopt the updated MWELO, or adopt a local ordinance at least as effective as the MWELO.
<br />potable water. potable water. Water that is drinkable and meets the U.S. Environmental Protection Agency (EPA) Drinking Water Standards.
<br />See definition in the California Plumbing Code, Part 5.
<br />potable water. [HCD] potable water. [HCD] Water that is satisfactory for drinking, culinary, and domestic purposes, and meets the U.S.
<br />Environmental Protection Agency (EPA) Drinking Water Standards and the requirements of the Health Authority Having
<br />Jurisdiction.
<br />recycled water. recycled water. Water which, as a result of treatment of waste, is suitable for a direct beneficial use or a controlled use that
<br />would not otherwise occur [Water Code Section 13050 (n)]. Simply put, recycled water is water treated to remove waste
<br />matter attaining a quality that is suitable to use the water again.
<br />submeter. [HCD 1] submeter. [HCD 1] A secondary device beyond a meter that measures water consumption of an individual rental unit within
<br />a multiunit residential structure or mixed-use residential and commercial structure. (See Civic Code Section 1954.202 (g)
<br />and Water code Section 517 for additional details.)
<br />water budget. water budget. Is the estimated total landscape irrigation water use which shall not exceed the maximum applied water
<br />allowance calculated in accordance with the Department of Water Resources Model Efficient Landscape Ordinance
<br />(MWELO).
<br />1.1.
<br />2.2.
<br />1.1.
<br />2.2.
<br />3.3.
<br />4.4.
<br />5.303.4 commercial kitchen equipment. 5.303.4 commercial kitchen equipment.
<br />5.303.4.1 food waste disposers. 5.303.4.1 food waste disposers. Disposers shall either modulate the use of water to no more than 1 gpm when the
<br />disposer is not in use (not actively grinding food waste/no-load) or shall automatically shut off after no more than 10
<br />minutes of inactivity. Disposers shall use no more than 8 gpm of water.
<br />Note: Note: This code section does not affect local jurisdiction authority to prohibit or require disposer installation.
<br />5.303.5 areas of addition for alteration. 5.303.5 areas of addition for alteration. For those occupancies within the authority of the California Building Standards
<br />Commission as specified in Section 103, the provisions of Section 5.303.3 and 5.303.4 shall apply to new fixtures in
<br />additions or areas of alteration to the building.
<br />5.303.6 standards for plumbing fixtures and fittings. 5.303.6 standards for plumbing fixtures and fittings. Plumbing fixtures and fittings shall be installed in accordance with
<br />the California Plumbing Code, and shall meet the applicable standards referenced in Table 1701.1 of the California
<br />Plumbing Code and in Chapter 6 of this code.
<br />section 5.304 outdoor water usesection 5.304 outdoor water use
<br />5.304.1 outdoor potable water use in landscape areas. 5.304.1 outdoor potable water use in landscape areas. Nonresidential developments shall comply with a local water
<br />efficient landscape ordinance or the current California Department of Water Resources' Model Water Efficient Landscape
<br />Ordinance (MWELO), whichever is more stringent.
<br />Notes: Notes:
<br />The Model Water Efficient Landscape Ordinance (MWELO) is located in the California Code of Regulations, Title
<br />23, Chapter 2.7, Division 2.
<br />MWELO and supporting documents, including a water budget calculator, are available at:
<br />https://www.water.ca.gov/.
<br />5.304.6 outdoor potable water use in landscape areas. 5.304.6 outdoor potable water use in landscape areas. For public schools and community colleges, landscape projects
<br />as described in Sections 5.304.6.1 and 5.304.6.2 shall comply with the California Department of Water Resources Model
<br />Water Efficient Landscape Ordinance (MWELO) commencing with Section 490 of Chapter 2.7, Division 2, Title 23,
<br />California Code of Regulations, except that the evapotranspiration adjustment factor (ETAF) shall be 0.65 with an additional
<br />water allowance for special landscape areas (SLA) of 0.35.
<br />Exception: Exception: Any project with an aggregate landscape area of 2,500 square feet or less may comply with the prescriptive
<br />measures contained in Appendix D of the MWELO.
<br />5.304.6.1 newly constructed landscapes.5.304.6.1 newly constructed landscapes. New construction projects with an aggregate landscape area equal to or greater
<br />than 500 square feet.
<br />5.304.6.2 rehabilitated landscapes. 5.304.6.2 rehabilitated landscapes. Rehabilitated landscape projects with an aggregate landscape area equal to or greater
<br />than 1,200 square feet.
<br />division 5.4 material conservation and resource efficiency
<br />section 5.401 general
<br />5.401.1 scope.5.401.1 scope. The provisions of this chapter shall outline means of achieving material conservation and resource
<br />efficiency through protection of buildings from exterior moisture, construction waste diversion, employment of techniques
<br />to reduce pollution through recycling of materials, and building commissioning or testing and adjusting.
<br />section 5.402 defiitions
<br />5.402.1 definitions. 5.402.1 definitions. The following terms are defined in Chapter 2 (and are included here for reference)
<br />adjust.adjust. To regulate fluid flow rate and air patterns at the terminal equipment, such as to reduce fan speed or adjust a
<br />damper.
<br />balance. balance. To proportion flows within the distribution system, including sub-mains, branches and terminals, according
<br />to design quantities.
<br />building commissioning. building commissioning. A systematic quality assurance process that spans the entire design and construction
<br />process, including verifying and documenting that building systems and components are planned, designed, installed,
<br />tested, operated and maintained to meet the owner’s project requirements.\
<br />organic waste.organic waste. Food waste, green waste, landscape and pruning wste, nonhazardous wood waste, and food
<br />test.test. A procedure to determine quantitative performance of a system or equipment
<br />section 5.407 water resistance and moisture managementsection 5.407 water resistance and moisture management
<br />5.407.1 weather protection. 5.407.1 weather protection. Provide a weather-resistant exterior wall and foundation envelope as required by California
<br />Building Code Section 1402.2 (Weather Protection), manufacturer's installation instructions or local ordinance, whichever
<br />is more stringent.
<br />5.407.2 moisture control.5.407.2 moisture control. Employ moisture control measures by the following methods.
<br />5.407.2.1 sprinklers.5.407.2.1 sprinklers. Design and maintain landscape irrigation systems to prevent spray on structures.
<br />5.407.2.2 entries and openings.5.407.2.2 entries and openings. Design exterior entries and/or openings subject to foot traffic or wind-driven rain to
<br />prevent water intrusion into buildings as follows:
<br />5.407.2.2.1 Exterior door protection. 5.407.2.2.1 Exterior door protection. Primary exterior entries shall be covered to prevent water intrusion by
<br />using nonabsorbent floor and wall finishes within at least 2 feet around and perpendicular to such openings plus
<br />at least one of the following:
<br />An installed awning at least 4 feet in depth.
<br />The door is protected by a roof overhang at least 4 feet in depth.
<br />The door is recessed at least 4 feet.
<br />Other methods which provide equivalent protection.
<br />5.407.2.2.2 flashing. 5.407.2.2.2 flashing. Install flashings integrated with a drainage plane.
<br />section 5.408 construction waste reduciton, disposal and recycling
<br />5.408.1 construction waste management. 5.408.1 construction waste management. Recycle and/or salvage for reuse a minimum of 65% of the non-hazardous
<br />construction and demolition waste in accordance with Section 5.408.1.1, 5.408.1.2 or 5.408.1.3; or meet a local
<br />construction and demolition waste management ordinance, whichever is more stringent.
<br />5.408.1.1 construction waste management plan. 5.408.1.1 construction waste management plan. Where a local jurisdiction does not have a construction and
<br />demolition waste management ordinance, submit a construction waste management plan that:
<br />nonresidential manditory measures sheet 1
<br />1.
<br />2.2.
<br />a.
<br />b.
<br />c.
<br />section 5.303 indoor water use
<br />5.303.1 meters.5.303.1 meters. Separate submeters or metering devices shall be installed for the uses described in Sections 503.1.1 and
<br />503.1.2.
<br />5.303.1.1 buildings in excess of 50,000 square feet. 5.303.1.1 buildings in excess of 50,000 square feet. Separate submeters shall be installed as follows:
<br />For each individual leased, rented or other tenant space within the building projected to consume more than
<br />100 gal/day (380 L/day), including, but not limited to, spaces used for laundry or cleaners, restaurant or food
<br />service, medical or dental office, laboratory, or beauty salon or barber shop.
<br />Where separate submeters for individual building tenants are unfeasible, for water supplied to the following
<br />subsystems:
<br />Makeup water for cooling towers where flow through is greater than 500 gpm (30 L/s).
<br />Makeup water for evaporative coolers greater than 6 gpm (0.04 L/s).
<br />Steam and hot water boilers with energy input more than 500,000 Btu/h (147 kW).
<br />5.303.1.2 excess consumption.5.303.1.2 excess consumption. A separate submeter or metering device shall be provided for any tenant within a new
<br />building or within an addition that is projected to consume more than 1,000 gal/day.
<br />5.303.3 water conserving plumbing fixtures and fittings. 5.303.3 water conserving plumbing fixtures and fittings. Plumbing fixtures (water closets and urinals) and fittings
<br />(faucets and showerheads) shall comply with the following:
<br />5.303.3.1 water closets. 5.303.3.1 water closets. The effective flush volume of all water closets shall not exceed 1.28 gallons per flush. Tank-
<br />type water closets shall be certified to the performance criteria of the U.S. EPA WaterSense Specification for Tank-Type
<br />toilets.
<br />Note:Note: The effective flush volume of dual flush toilets is defined as the composite, average flush volume of two reduced
<br />flushes and one full flush.
<br />5.303.3.2 urinals.5.303.3.2 urinals.
<br />5.303.3.2.1 wall-mounted urinals.5.303.3.2.1 wall-mounted urinals.The effective flush volume of wall-mounted urinals shall not exceed 0.125
<br />gallons per flush
<br />5.303.3.2.2 floor-mounted urinals. 5.303.3.2.2 floor-mounted urinals. The effective flush volume of floor-mounted or other urinals shall not exceed
<br />0.5 gallons per flush.
<br />5.303.3.3 showerheads. [BSC-CG]5.303.3.3 showerheads. [BSC-CG]
<br />5.303.3.3.1 single showerhead. 5.303.3.3.1 single showerhead. Showerheads shall have a maximum flow rate of not more than 1.8 gallons per
<br />minute at 80 psi. Showerheads shall be certified to the performance criteria of the U.S. EPA WaterSense
<br />Specification for Showerheads.
<br />5.303.3.3.2 multiple showerheads serving one shower. 5.303.3.3.2 multiple showerheads serving one shower. When a shower is served by more than one showerhead,
<br />the combined flow rate of all the showerheads and/or other shower outlets controlled by a single valve shall not
<br />exceed 1.8 gallons per minute at 80 psi, or the shower shall be designed to allow only one shower outlet to be in
<br />operation at a time.
<br />Note: Note: A hand-held shower shall be considered a showerhead.
<br />5.303.3.4 faucets and fountains.5.303.3.4 faucets and fountains.
<br />5.303.3.4.1 nonresidential lavatory faucets. 5.303.3.4.1 nonresidential lavatory faucets. Lavatory faucets shall have a maximum flow rate of not more than 0.5
<br />gallons per minute at 60 psi.
<br />5.303.3.4.2 kitchen faucets. 5.303.3.4.2 kitchen faucets. Kitchen faucets shall have a maximum flow rate of not more than 1.8 gallons per minute
<br />at 60 psi. Kitchen faucets may temporarily increase the flow above the maximum rate, but not to exceed 2.2 gallons per
<br />minute at 60 psi, and must default to a maximum flow rate of 1.8 gallons per minute at 60 psi.
<br />5.303.3.4.3 wash fountains. 5.303.3.4.3 wash fountains. Wash fountains shall have a maximum flow rate of not more than 1.8 gallons per
<br />minute/20 [rim space (inches) at 60 psi].
<br />5.303.3.4.4 metering faucets. 5.303.3.4.4 metering faucets. Metering faucets shall not deliver more than 0.20 gallons per cycle.
<br />5.303.3.4.5 metering faucets for wash fountains. 5.303.3.4.5 metering faucets for wash fountains. Metering faucets for wash fountains shall have a maximum flow rate
<br />of not more than 0.20 gallons per minute/20 [rim space (inches) at 60 psi].
<br />Note: Note: Where complying faucets are unavailable, aerators or other means may be used to achieve reduciton.
<br />5.303.3.4.6 pre-rinse spray value. 5.303.3.4.6 pre-rinse spray value. When installed, shall meet the requirements in the California Code of Regulations,
<br />Title 20 (Appliance Efficiency Regulations), Section 1605.1 (h)(4) Table H-2, Section 1605.3 (h)(4)(A), and Section
<br />1607(d)(7), and shall be equipped with an integral automatic shutoff.
<br />for reference only: for reference only: The following table and code section have been reprinted from the California Code of Regulations,
<br />Title 20 (Appliance Efficiency Regulations), Section 1605.1 (h)(4) and Section 1605.3 (h)(4)(A).
<br />1.
<br />2.
<br />3.
<br />4.4.
<br />1.
<br />2.
<br />3.
<br />4.
<br />5.
<br />5.106.8 light pollution reduciton. [N]. 5.106.8 light pollution reduciton. [N]. Outdoor lighting systems shall be designed and installed to comply with the
<br />following:
<br />The minimum requirements in the California Energy Code for Lighting Zones 0-4 as defined in Chapter 10, Section
<br />10-114 of the California Administrative Code; and
<br />Backlight (B) ratings as defined in IES TM-15-11 (shown in Table A-1 in Chapter 8);
<br />Uplight and Glare ratings as defined in California Energy Code (shown in Tables 130.2-A and 130.2-B in Chapter
<br />8) and
<br />Allowable BUG ratings not exceeding those shown in Table 5.106.8, [N] or Comply with a local ordinance lawfully
<br />enacted pursuant to Section 101.7, whichever is more stringent.
<br />Exceptions: [N]Exceptions: [N]
<br />Luminaires that qualify as exceptions in Sections 130.2 (b) and 140.7 of the California Energy Code.
<br />Emergency lighting.
<br />Building facade meeting the requirements in Table 140.7-B of the California Energy Code, Part 6.
<br />Custom lighting features as allowed by the local enforcing agency, as permitted by Section 101.8 Alternate
<br />materials, designs and methods of construction.
<br />Luminaires with less than 6,200 initial luminaire lumens.
<br />No.Revisions Date
<br />1 SD Set 06/05/2025
<br />2 DD Set 07/03/2025
<br />3 90% CD Set 08/14/2025
<br />4 Plan Check Submittal 09/19/2025
<br />09-2027
|