2525 N Grand Ave & MTR01 - Plan - Laserfiche WebLink

Home Browse Search

Rev: 07/16//2019 Page 2 of 2 Compliance with the California Electrical Code: A. Does the plan include EVCS manufacturer's specs and installation guidelines? Y N B. Does the electrical plan identify the amperage and location of existing electrical service panel? Y N 1) If yes, does the existing panel schedule show room for additional breakers? Y N C. Is the charging unit rated more than 60 amps or more than 150V to ground? Y N 1) If yes, are disconnecting means provided in a readily accessible location in line of site? (CEC 625.43) Y N D. Does the charging equipment have a Nationally Recognized Testing Laboratory (NRTL) approved listing mark? (UL 2202/UL 2200) Y N E. If trenching is required, is the trenching detail called out? Y N 1) Is the trenching in compliance with minimum cover requirements for wiring methods or circuits? (18” for direct burial per CEC 300.5) Y N Compliance with California Green Building Standards Code: A. Do the CAL Green EV Readiness installation requirements apply to this project: Y N 1) Do the plans demonstrate conformance with mandatory measures for 10% of total parking spaces, for new multifamily dwellings provided for all types of parking facilities, to be electric vehicle charging spaces (EV spaces) capable of supporting future EVCS? (4.106.4.2) Y N 2) Do the construction documents indicate the location of the proposed EV spaces where at least one is located in common use areas and available to all residents for use? (4.106.4.2.1) Calculations for the required number of EV spaces shall be rounded up to the nearest whole number. Y N 3) When EV chargers are installed, EV spaces required by Section 4.106.4.2.2, item 3 shall comply with at least one of the following options: a. The EV space shall be located adjacent to an accessible parking space that complies with CBC Chapter 11A, to allow use of the EV charger from the accessible parking space. b. The EV space shall be located on an accessible route, as defined by CBC Chapter 2, to the building. c. EV charging space(s) comply with Section 4.106.4.2.2, items 1, 2 and 3. Y N Notes: This criteria is intended for an expedited EVCS permitting process. If any items are checked NO, please revise plans to fit within the eligibility checklist; otherwise the permit application may go through the standard plan review and approval process. Electrical plans shall be completed, stamped and signed by a California Licensed Electrical Engineer or a C-10 electrical contractor. EVCS project review is limited to health and safety requirements found under local, state, and federal law. EVCS permit approval is not subject to approval of an association (as defined in Section 4080 of the Civil Code). Project Address: Applicant Signature: Applicants Printed Name: Contractor’s License Number and type: - 2525 North Grand Ave Aaron Wallen