Laserfiche WebLink
EXHIBIT B — OUTLINE SPECIFICATIONS <br />DIVISION 2 <br />1. Interior walls and plaster or gypsum board ceilings shall be finished in latex eggshell <br />paint. <br />2. Heavy textured walls shall be sanded smooth and prepared for a new paint finish. <br />3. Existing wall coverings shall be removed (unless otherwise noted), wall surface shall <br />be prepared, and receive a new paint finish. <br />4. Doors and frames shall be refinished to provide a new -looking appearance. <br />5. HVAC registers and grilles shall,be.in a -newly painted condition. In the event the <br />registers are in poor condition; registers shall be replaced by the Lessor. <br />6. Stained or natural finished wood shall be refinished with sealer and lacquer. <br />7. Metal toilet stall partitions shall be repainted using electrostatic paint process. <br />F. Where altefatipr'work occurs, new painted surfaces shall extend to the natural break. <br />G. Where wall *covering is specified, the product shall be "breathable" to prevent mold and <br />bacteria development. All adhesives (including but not limited to adhesives for carpet, <br />carp�f tile, plastic' laminate, wall coverings, adhesives for wood, or sealants) shall meet <br />tho WQC content limit specified in CalGreen Sections 4.504.2.1-4.504.2.4 and 5.504.4.1- <br />5504.4.3. . <br />H. Interior sealants shall not contain mercury, butyl rubber, neoprene, styrene butadiene <br />`rubber (SBR), nitride, aromatic solvents (organic solvent with a benzene ring in its <br />molecular structure), fibraus talc or asbestos, formaldehyde, halogenated solvents, lead <br />cadmium, hexavalent chromium, or their components. <br />2.10 BUILDING SPEC}ALTIES <br />A. Toilet room partitions and accessories: In addition to any code -required toilet room <br />.accessories`; Lessor shall furnish, install, maintain, and replenish where appropriate, the <br />following accessories... ; <br />1. Coin=operpted`sanitary napkin dispenser (one per women Is toilet room) <br />2. Folding utility shelf and coat hook (one per toilet stall) <br />ror 3. Mirwith metal -frame assembly (one per lavatory, two or more lavatories may have <br />one continuous mirror) <br />4. Paper towel dispensers (one per every two lavatories) <br />5. Sanitary napkin waste receptacle (one per women's toilet stall) <br />6. Soap dispensers (one per lavatory) <br />7. Toilet paper dispenser, continuous toilet -paper flow, capable of holding two rolls (one <br />per toilet stall) <br />8. Toilet seat -cover dispenser (one per toilet stall) <br />9. Trash receptacles (one per toilet room) <br />All accessories shall be constructed of stainless steel and, exposed surfaces shall have satin <br />finish. <br />1. Toilet room partitions: <br />2. New toilet stall partitions shall match building standard. <br />3. Lessor shall furnish and install privacy screens at all urinal locations — screens shall <br />match toilet partitions. <br />B, Paper towel and soap dispensers: <br />20 <br />Rev. MaMh 2019 <br />bw <br />