CALIFORNIA, STATE OF EMPLOYMENT DEVELOPMENT DEPARTMENT (2)

Home Browse Search

EXHIBIT B — OUTLINE SPECIFICATIONS DIVISION 2 C. Cabinets shall be of sizes and types as indicated in the Exhibit "A." Base cabinets shall have one row of drawers and one adjustable shelf below with concealed hinged doors, unless noted otherwise. Lessor shall provide a 4" toe space at base cabinets. Upper cabinets shall have two rows of adjustable shelves and hinged doors, unless noted otherwise. D. Counter tops shall be finished with plastic laminate or solid surface material. Counter tops shall be self -edged unless otherwise noted. Counter tops with sinks shall be fully formed and have a no -drip edge, and coved splash joint. All counter tops shall have a back and side splash unless otherwise noted. Sinks shall have a sanitary metal rim or be a self -rim stainless steel sink, Other materials may be submitted to the State for approval. E. Shelving units shall be a minimum of 3/4" thick white melamine, per AWS. Cover exposed edges with plastic laminate or hardwood edge bound. F. Face of millwork shall be high-pressure decorative plastic laminate. NEMA LD-3 grades as required by AWS. G. Lessor shall provide cabinet hardware such as (but not limited to): concealed hinges, pulls, catches, shelf rests, standards and brackets, and drawer slides. All hardware shall comply with ANSI A 156.9-01 and Builders Hardware Manufacturers Association. H. All millwork shall be installed in accordance with all seismic safety requirements of the code. L Base cabinets containing sinks shall be CBC/ADA access compliant. Unless otherwise noted, Lessor shall provide cabinet doors with attached toe kicks with rubber base to conceal clear space below. 2.9 GYPSUM BOARD FINISH/PAINTINGM/ALL COVERING/SEALANTS A. Gypsum board finish shall be a smooth, blemish -free, level 4 finish and free of tool marks and ridges. Heavily textured wall surfaces are not acceptable. B. Water -based paints shall not be formulated with aromatic hydrocarbons, formaldehyde, halogenated solvents, mercury or mercury compounds, or tinted with pigments of lead, cadmium, chromium VI, antimony and their oxides. All architectural paints and coatings shall comply with VOC limits of the California Green Standards Code unless more stringent local limits apply. C. All wall texture and paint colors shall be selected and/or approved by DGS. D. New surfaces: 1. New partitions without factory finish shall be painted with one coat of primer/sealer and two finish coats of premium quality latex, eggshell paint. Flat paint is not acceptable. 2. Break rooms, toilet rooms, and janitorial closets shall be painted with semi -gloss enamel paint. 3. Paint -grade doors and trim shall be latex semi -gloss enamel paint. 4. Stained or natural finish wood shall be finished with sealer and two coats lacquer. They shall be finished using non -toxic, water -based urethanes or similar environmentally sensitive products. E. Existing surfaces: 19 I Rev. March 2019