Laserfiche WebLink
Pedro A. Garcia <br />DP No. 2018-06R <br />Master ID No. 2018-141605 <br />September 27, 2019 <br /> <br /> <br />Page 4 of 15 <br /> <br />4) Redesign the parking lot layout to comply with standard striping design as shown <br />below. Additionally, extend the adjacent landscape planter or curb for two feet at the <br />head of the parking stalls in lieu of installing wheel/bumper stops (see Diagram <br />Below). <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />5) Revise the site plan to show installation of bike racks as required per Section 41- <br />1307.1 of the SAMC and submit details of proposed bike racks. This project needs <br />to provide no less than four bicycle spaces. Relocate bike racks to the front of the <br />building and provided details of the bike racks. <br /> <br />6) A freestanding trash enclosure shall comply with the following: <br />a. A swinging double door as an access gate with locking capabilities shall be <br />included on one (1) side of the enclosure. The enclosure shall be designed <br />with decorative heavy gauge metal gates with cane bolts on the doors to <br />secure the gates when in the open position. Doors or gates to the enclosure <br />shall be self-closing. <br />b. Enclosures shall be constructed of solid masonry material with decorative <br />exterior surface finish compatible to the main building. Split face concrete <br />block finish is recommended. <br />c. The enclosure shall have an architecturally compatible solid roof/cover <br />feature. <br />d. The enclosure shall incorporate a separate pedestrian gate/door entry. <br />e. Flowering vines shall be included on the walls of the enclosure to reduce <br />graffiti and soften the appearance. <br />Comment was partially addressed. <br /> <br />7) Identify properly all existing and proposed walls and fences. All walls and fences <br />shall comply with SAMC Section. 41-610. Remove front yard fence or reduce the <br />size of the proposed fence to comply with the requirements of SAMC Section 41- <br />610. Comment was partially addressed. <br />