Laserfiche WebLink
In advance of initial new Cart distribution, Contractor shall mail a notice of rates, and <br />provide Customers the opportunity to request service changes. If no response is <br />received by Customer by specified date, Customer will retain the same level of service <br />currently provided as reported by the previous waste hauler. <br />B. Cart Design Requirements. The Carts shall be manufactured by injection <br />or rotational molding and meet the Cart design and performance requirements as <br />specified below. All Carts selected shall be subject to City approval. The City will not <br />permit Carts and Cart lids with inconsistent colors or m poor condition to be used in the <br />City at any time during the term of this Agreement, and may require Contractor to <br />replace such Carts. Contractor shall ensure that all Carts in service during the terms of <br />this Agreement comply with CalRecycle requirements under SB 1383. <br />C. Capacity. References to Cart sizes of 35, 64, or 96 gallons are approximate. <br />Acknowledging the different sizes provided by the various Cart manufacturers, the <br />Carts shall be uniform in appearance and must conform to the following ranges in size: <br />• 30 to 40 gallons, <br />• 60 to 70 gallons, and <br />• 90 to 101 gallons. <br />D. Cart Handles. The Cart handles and handle mounts may be an integrally <br />molded part of the Cart body or molded as part of the lid. The Cart handles will <br />provide comfortable gripping area for pulling or pushing the Cart or lifting the lid. <br />Pinch points are unacceptable. <br />E. Cart Lid. Each Container shall be provided with a lid that continuously <br />overlaps and comes in contact with the Container body or otherwise causes an interface <br />with the Container body that simultaneously: <br />• Prevents the intrusion of rainwater, rodents, birds, and flies; <br />• Prevents the emission of odors; <br />• Enables the free and complete flow of material from the Container during the <br />dump cycle without interference with the material already deposited in the <br />truck body or the truck body itself and its lifting mechanism; <br />March 9, 2020 64 City of Santa Ana - DRAFT <br />60A-153 <br />