Laserfiche WebLink
• Permits users of the Container to conveniently and easily open and shut the <br />lid throughout the serviceable life of the Container; <br />• The lid handle shall be an integrally molded part of the lid; <br />• The lid (and body) must be of such design and weight that would prevent an <br />empty Container from tilting backward when flipping the lid open; and, <br />• The lid shall be hinged to the Cart body in such a manner so as to enable the <br />lid to be fully opened, free of tension, to a position whereby it may rest against <br />the backside of the Container body. <br />F. Cart Colors. The Refuse, Recycling and Organics Carts or Cart lids will be <br />differentiated by color. The colors shall be colorfast and resistant to fading as a result of <br />weathering or ultraviolet degradation. Cart and Cart lid colors shall be consistent <br />throughout the City, and shall comply with CalRecycle requirements under SB 1383. <br />G. Cart Labeling and Hot Stamping. Labels used on Carts shall be placed on <br />the inside of the Cart lid, and hot stamps shall be on the top of the lid and/or on the <br />body of the Cart. Each Cart shall be hot stamped with the material type (e.g., trash, <br />Recycling, Organics) in English and Spanish. Labels shall include graphic instruction on <br />what materials should and should not be placed in each Cart. Design for both the labels <br />and the hot stamps must be approved by City prior to ordering labels or Carts. City <br />shall approve what information is included on the label and in the hot stamp, as well as <br />approve design and quality. Labels shall be replaced when worn, and when <br />information on the label is in need of updating, but no later than 90 days of request <br />from City. Information on the Carts shall include the telephone number to call for <br />Contractor for Bulky Item pickups and for general Customer service. All Carts shall be <br />labeled in accordance with CalRecycle requirements under SB 1383 throughout the term <br />of this Agreement. <br />H. Cart Performance Requirements. All Carts shall be designed and <br />manufactured to meet the minimum performance requirements described below. <br />I. Cart Load Capacity. Depending on the capacity, the Carts shall have a <br />minimum load capacity as noted below without Container distortion, damage, or <br />reduction in maneuverability or any other functions as required herein. <br />March 9, 2020 60A65154 City of Santa Ana - DRAFT <br />