Laserfiche WebLink
!`' SMARTWORKS <br />2.3. SmartWorks Compass Modules <br />The following SmartWorks Compass Software modules will be installed and configured as part of the scope <br />of this engagement: <br />• SmartWorks Compass, including the following modules: <br />• MeterSense MDMS <br />• KPI Dashboard <br />• Leak Detection and Notification <br />This section includes a description of each module as well as their corresponding Pre -requisites and <br />Assumptions. <br />2.3.1. MeterSense MDM <br />SmartWorks will install and configure MeterSense MDM module. <br />Module Functionality includes: <br />• Support meter deployment <br />• Reports to help ensure that meters are provisioned correctly and communicating in the field <br />• Monitor AMI Performance <br />• Report on number of reads delivered compared to AMI Service Level Agreement <br />• Enable Meter -to -Cash <br />• Validation of reads, billing determinants and customer service support <br />• Alert via Meter Events <br />• Store and report on Tampers, Leaks, error and other meter flags <br />2.3.1.1. Pre -Requisites & Assumptions <br />• Meter reads are imported from the AMI as defined in section 3.1Errorl Reference source not <br />found. AMI Head End Systems. <br />• Meter events are imported from the AMI as defined in section 3.1 AMI Head End System. <br />• Meters installation/removal are synchronized with the system of record as defined in sections <br />3.2.1 CIS Synchronization Integration. <br />• After installation of MeterSense MDM by SmartWorks, meter reads validation routines (VEE — <br />Validate, edit, estimate) as defined in SmartWorks User -Guide VEE will be available for <br />configuration. <br />City of Santa Ana—SmartWorks Statement of Work <br />25H-59 Page 52 <br />