WEBER WATER RESOURCES CA, LLC - Laserfiche WebLink

Home Browse Search

CITY OF SANTA ANA RFP NO.; 21-059 WATER WELL, PUMP AND MOTOR REHABILITATION AND REPAIR SERVICES All testing, inspections and incidentals related to required reports shall be considered included within the bid items for said testing report and no additional compensation shall be allowed. 12. MINIMUM QUALIFICATIONS a. All electric motor repair shops shall be EASA Accredited and shall provide a copy of the certification upon request by the City. Failure to provide a sub -contractor that is an EASA Accredited Member as a part of the proposal may be grounds for proposal rejection. b. Contractor or Contractor's subcontractor shall be certified as an UL Facility and shall provide a copy of the certification upon request by the City. c, Contractor shall be responsible for obtaining all original equipment manufacturer (OEM) technical documents, drawings and parts when necessary. d. Contractor shall have all engineering, design, metalizing, welding, heat treating, machining, balancing, calibrating and testing capabilities necessary to completely refurbish/rewind electric motors. e. Equipment used for inspecting, calibrating and testing pumps and motors shall be up-to-date and have calibration certificates, less than one year old, traceable to National Institute of Standards and Technology (NIST) standards where applicable, 13. SECURITY REQUIREMENTS Public Works Agency field representative will unlock the Public Works Agency facilities entry gates on the first day of work to allow Contractor access. Contractor shall then supply their own padlock(s) for some entry gates as specified by the Public Works Agency. Contractor's padlock(s) shall lock onto the Public Works Agency's padlock connecting to the chain -link, which enables both the Public Works Agency field representative and Contractor to unlock the entry gates. After completion of work, padlock(s) shall be removed by the Contractor. Contractor and/or subcontractors shall notify the Public Works Agency field representative upon arrival and departure to or from jobslte. 14, PARTS, MATERIALS AND WARRANTIES The Public Works Agency will reimburse the Contractor for the cost of repair parts, materials, and replacement equipment, plus 15 percent markup, provided the Contractor has obtained the City's prior written approval of Contractor's written estimate. All replacement equipment shall be approved by the Public Works Agency prior to the purchasing of the equipment. The Contractor shall provide manufacturer documentation to the Public Works Agency for any replacement equipment. The Contractor shall submit an invoice with attached applicable receipts for a particularjob to the Project Manager, The Contractor shall assure that all materials, parts, and workmanship supplied shall be free from original or developed defects. Contractor shall provide a minimum of one year warranty for materials and parts and thirty days on workmanship. Should original or developed defects and/or failures appear within the minimum warranty of one year after work completion, Contractor shall, at its expense, rectify such defects and/or failures and make all replacements and adjustments that are required. Corrective work shall be performed by the Contractor and given the highest priority after Public Works Agency's notification to do so, and shall be completed to the satisfaction of the Project Manager. The Contractor shall proceed diligently to complete said work within the tirne allotted as approved by the Project Manager.