TRUSTAR ENERGY LLC - Laserfiche WebLink

Home Browse Search

1.5.1 All equipment shall be permanently affixed and accessible for maintenance and operation in accordance with all code requirements. Supports for all equipment shall conform to seismic requirements for intended location of installation. 1.5.2 The Supplier shall notify the City's Representative no later than 10 working days prior to factory testing of the compressor systems to allow the City Representative the option to witness the test prior to shipment. Witnessing of the testing does not relieve the manufacturer of the responsibility to comply with the specifications. 1.5.3 All paint and priming products, whether shop or field applied, shall be lead, chromium, and cadmium free. In addition, these products and all other materials used shall comply with local, regional, state and federal air quality rules and regulations, especially thoseof the South Coast Air Quality Management District. 1.5.4 All materials and exposed surfaces subject to corrosion, shall receive a two -coat shop - applied paint system. 1.5.5 Equipment furnished shall be factory inspected and certified by a National Recognized Testing Laboratory approved by local authority having jurisdiction for compliance with NFPA 70. Certification shall be evidenced by a written report and the application of a sticker on the equipment by the third -party inspection firm. 1.5.6 Deviations: Compliance with the provisions of this specification is the vendor's responsibility. Any deviation from this specification, or any of its provisions, shall be clearly identified in the vendors bid. 1.6 Qualifications 1.6.1 Manufacturer: Company specializing in manufacturing and packaging products and equipment specified in this section with minimum of five (5) years documented experience. 1.6.2 References: On company letterhead, provide references for at least (5) projects of similar size and complexity completed within the last five (5) years. State years of experience as described in Part 1.5-A. Include company name, address, primary contact's name and phone number, date completed, and approximate value of the contract. One oaae oer oroiect. 1.7 GENERAL DESIGN CONDITIONS 1. Electrical power supplied to the system will be 480 VAC ± 10%, 3-phase, 60 hertz, unless noted otherwise. Power will be provided from an existing power distribution panel located approximately 100 feet from the equipment. 2. Natural Gas: PSE form from gas company will be provided when available from Southern California Gas Company. City of Santa Ana- RFP 20-095 CNG Fuel Station: Design, Build, Operate and Maintain 15