INSTRUMENT CONTROL SERVICES - Laserfiche WebLink

Home Browse Search

The Contractor shall meet the following minimum qualifications: 1. All work is to be performed in compliance with all applicable codes, ordinances, laws, standards, due care, and Occupational Safety and Health Administration (OSHA) safety requirements. 2. The Contractor shall have a minimum of five (5) years of experience in providing industrial control panel building services. 3. The Contractor shall possess state and local permits, licenses and certificates required by law to commence, carry, and complete the work. 4. Provide all necessary equipment to competently perform and complete work as specified. 1. SAFETY Proposer shall be solely and completely responsible for the condition of the project site, including safety of all persons and properties during the performance of the work. In addition, proper safety equipment must be worn at all times. These requirements shall apply continuously until the contract is terminated and shall not be limited to normal working hours. The Contractor/Consultant shall assure that each employee or subcontractor under the contractor's supervision is trained in the work practices necessary to safely perform his or her job. J. INSURANCE REQUIREMENTS The successful bidders shall furnish the City with original copies of valid insurance policies herein required upon execution of the contract and shall maintain said policies in full force and effect at all times during the term of this contract. Said insurance policies shall comply with all requirements set forth in these specifications. Contractor(s) shall keep a current certificate of insurance at the City of Santa Ana at all times and shall immediately report any changes to the City, K. FEE SCHEDULE Contractor shall submit a fee schedule as described in Section IV.B.3 of RFP. The Well 40 and SA-7 panel design drawings provided as Exhibit A and Exhibit B respectively are to be used as the basis for completing the Fee Schedule form. No separately stated freight or deliveries will be considered. Bidders shall include all costs in the unit price bid. Furthermore, the Contractor shall submit additional labor, material and rental equipment rates along with fee schedule. Contractor's labor and equipment rate sheet shall list rates for all labor designations, equipment, rentals, and materials. The bid items specified in the fee schedule are for reference purposes only. Labor increases shall be subject to mutually agreeable terms between the City and the Contractor. The City may request related services that will be paid at the vendor's standard labor and equipment rate submitted. Fee proposal shall be outlined as follows: ---End of SCOPE OF WORK Section --- City of Santa Ana - RFP 21-100 Water Resources Panel Building Services Page 22 of 39