My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
Agenda Packet_2022-07-19
Clerk
>
Agenda Packets / Staff Reports
>
City Council (2004 - Present)
>
2022
>
07/19/2022 Special and Regular & Special HA
>
Agenda Packet_2022-07-19
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
7/18/2022 10:59:30 AM
Creation date
7/14/2022 1:11:51 PM
Metadata
Fields
Template:
City Clerk
Doc Type
Agenda Packet
Agency
Clerk of the Council
Date
7/19/2022
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
620
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
Notes: <br />1. Measured from nearest adjacent curb level on the site on which the sign is constructed. <br />May be modified through Planning Commission approval of a Conditional Use Permit. <br />2. The minimum separation between billboards shall be one -thousand (1,000) feet (including <br />static billboards) or standards established by Caltrans in effect at the time the permit is <br />issued, whichever is greater, as measured from the base of each billboard's vertical <br />support. <br />3. All conduits, cables and appurtenances shall be concealed within the vertical support. <br />Sec. 41-1132. - Design Standards. <br />(a) The words "Santa Ana" shall permanently appear on the billboard structure in a <br />size large enough to be visible to drivers using the freeway. The precise location, <br />size and font of the words shall be determined by the approval authority. <br />(b) All ground -mounted equipment shall be screened from view at street level. The <br />entire site occupied by the billboard shall be appropriately landscaped with <br />groundcover and shrubs to the satisfaction of the approval authority. <br />(c) Each freeway billboard must be oriented primarily for viewing from the freeway <br />and shall be oriented, and adequately shielded if necessary, to prevent the <br />trespass of light and glare upon any residential land use, including those in <br />mixed -use districts, as exists on the date of building permit issuance. <br />(d) The billboard shall utilize an innovative billboard format, shall creatively use the <br />latest in technology to ensure digital image quality, and shall use innovative <br />architectural features and materials. <br />(e) All billboards shall plainly display, and be visible from no less than fifty (50) feet, <br />the name of the person or company owning or maintaining such billboard, <br />contact information for said person or company, and the billboard's identification <br />number. <br />(f) Billboards projecting over a driveway or drive aisle shall have a minimum <br />clearance of 20 feet between the lowest point of the sign and the driveway grade. <br />(g) No part of any billboard shall cross onto an adjacent property. <br />(h) Billboards projecting over a pedestrian walkway shall have a minimum clearance <br />of twelve (12) feet between the lowest point of the sign and the walkway grade. <br />(i) All billboards not projecting over drive areas or pedestrian walkways shall have a <br />minimum clearance of twelve (12) feet between the lowest point of the billboard <br />and ground level. <br />Sec. 41-1133. - Lighting and Display Requirements. <br />(a) Signs shall produce a maximum 0.3 foot-candles over ambient light levels. <br />(b) The display brightness shall be controlled by a photocell or light sensor that <br />adjusts the brightness to the required level based on ambient light conditions <br />without the need for human input. Use of other brightness adjustment methods, <br />Ordinance No. NS-XXX <br />City Council 12 — 10 7/1972U2' of u <br />
The URL can be used to link to this page
Your browser does not support the video tag.