Laserfiche WebLink
SERVICE AGREEMENT— ALL INCLUSIVE 100% WARRANTY <br />PREVENTATIVE MAINTENANCE SCHEDULE- Maintenance Checklist and Duties Guideline <br />performed by Opal Fuels. <br />Tasks included in P.11 agreement are done ky Opal Fuels fhctnrr brained Gehl service techniciarr.c, <br />Compressors & Related Equipment <br />LoL2ing <br />• Log running hours <br />• Log temperatures <br />• Log suction pressure <br />• Log inter -stage pressures <br />• Log oil levels and usage <br />Compressors <br />• Check oil consumption and oil levels <br />• Check leak rate of mechanical seals <br />• Drain effluents from receiver tank <br />• Leak check pressurized loop — look and listen for leaks <br />• Run to operating conditions; if able <br />• Record operating temperatures <br />• Record operating pressures <br />• Record motor FLA <br />• Observe & record unusual conditions <br />• Observe compressor control operations <br />• Observe priority or buffer fill operation <br />• Fill vehicles as available <br />• Observe dispenser operations <br />• Check gas dryer operations <br />• Inspect suction filter: change as required <br />• Replace all inter -stage filter elements, as applicable to manufacturers requirements <br />• Exchange motion work oil and filter; as applicable and to manufacturers requirements <br />• Clean motion work oil strainer during oil changes <br />• Inspect clean discharge check valves <br />• Check inter -stage check valves for contamination <br />• Clean v-belt grooves of flywheel and motor pulleys <br />• Check condition of v-belt and belt tension <br />• Cleardinspection suction/discharge valves of all stages <br />• Grease/lubricate motor bearings <br />• Check condensate collecting tank for contamination <br />• Check all flexible hoses for signs of deterioration or damage <br />• Inspect v-belts for proper wear and aligmitent <br />• Torque all cylinder heads (machine warns and in standstill condition) <br />Dispensers- Fast Fill (if applicable) <br />• Verify on/off switch operations <br />• Visually inspect tubing, piping, and valves for leaks and abnormalities <br />