Item 16 - Amend Agreements for Renewable Natural Gas Fueling Station

Home Browse Search

07/07/2022 - Proposal No: Q-00390 Quote Valid until: 12/31/2022 Opal Fuels - 10225 Philadelphia Court, Rancho Cucamonga, 91730 | 909-793-3700 | (fax) 909-793-8056 | www.opalfuels.com temperature compensation and time of day operation for time fill applications. Typically at least 1 storage bottle is required per zone. FF Filter assembly (6 filters at priority panel) - Qty 1 - Included There will be dual Parker high-pressure filters installed between the compressor discharge and the dispensers to catch any oil bypass and contaminants before CNG is dispensed into the trucks. The filters will be located on a stand next to the priority panel for maximum effectiveness. One set of two (2) filters will be located at the discharge outlet of the high bank, mid bank, and low bank on the storage vessels. Filter stand includes a 99.5% 3/4Ã¢Â?Â? JS3B-10 pre-coalescer filter and 1Ã¢Â?Â? JS4C 99.9% final filter. Flow Meter for Time Fill Metering - Qty 4 - Included Flow Meter CNG050 - 40 to 4444 scfm capacity constructed of stainless steel, pressure rated to 5,000 psi. Temperature rated from -40°F to +247°F. Mass flow accuracy to ± .5%. Rated for hazardous area installation. Weights and Measures rated. Reads in liters, DGE, or GGE. All-weather rated. GD-036-S-M-460-150-4 - 1230 scfm @ 30 psi - Qty 1 - Included ANGI single tower manual regen dryer, 36" vessel, 150 psi design pressure, 4" class 150 flanges. Includes digital dew point monitor, isolation and bypass valves, blower, heater, cooler, water separator and collection tank to regenerate the desiccant. Requires 460/3/60 power. Mechanical Base High/Low Pressures for compressor(s) [REQUIRED] - Qty 2 - Included Base High/Low Pressure per compressor Regulator and Flex Hose for compressor(s) [REQUIRED] - Qty 2 - Included MLP - Regulator and Flex Hose per Compressor Install Main Gas Line (House Line) from Utility Meter set to compressor area Under 100 PSI (HDPE) - Included Install Main Gas Line (House Line) from Utility Meter set to compressor area Under 100 PSI (HDPE) Motor Starter Panel - Dual 200HP - Qty 1 - Included The motor starter panel is designed to perform several different custom functions within the compressor design - as well as a soft start for your electric motor. The other functions include, but are not limited to: dryer power, enclosure power, gas detection power, time-fill panel power, cooling fan power, ESD for time-fill line power, and spares for future options. Motor Starter Cooling Fan - Qty 1 - Included A cooling fan kit is added to the side of the motor starter enclosure to cool motor starter panels rated at 105F°. This option will extend the maximum operating temperature to 120°F ambient conditions. Rated for single, dual or triple motor starters. Opal Fuels Wireless Communication Panel - Qty 1 - Included Opal Fuels Wireless Communication Panel: An Opal Fuels engineered wireless full-time equipment monitoring system which includes: email and text messaging for system faults, continuous time-based logging of system operating parameters, continuous event-based logging of system events. The system provides local web server for real-time and logged data display. Provides for remote access for Opal Fuels data collection and support via secure VPN connection. Also provides Network Address Translation [NAT] for secure interface to the customer's network.