Laserfiche WebLink
underlying sediments may have high sensitivity, construction activity shall be <br />monitored by a qualified paleontologist. The paleontologist shall have the authority to <br />halt construction during construction activity as outlined in Mitigation Measure GEO-3. <br />GEO-3 All Projects. In the event of any fossil discovery, regardless of depth or geologic <br />formation, construction work shall halt within a 50-foot radius of the find until its <br />significance can be determined by a qualified paleontologist. Significant fossils shall <br />be recovered, prepared to the point of curation, identified by qualified experts, listed in <br />a database to facilitate analysis, and deposited in a designated paleontological <br />curation facility in accordance with the standards of the Society of Vertebrate <br />Paleontology (2010). The most likely repository is the Natural History Museum of Los <br />Angeles County. The repository shall be identified and a curatorial arrangement shall <br />be signed prior to collection of the fossils. <br />Finding <br />Finding 1. The City hereby makes Finding 1. Changes or alterations have been required in, or <br />incorporated into, the project that avoid or substantially lessen the significant environmental <br />effect as identified in the PER. These changes are identified in the form of the mitigation <br />measures above. The City of Santa Ana hereby finds that implementation of the mitigation <br />measures is feasible, and the measures are therefore adopted. <br />5. Noise <br />Impact 5.12-3: Buildout of the individual land uses and projects for implementation of the <br />GPU may expose sensitive uses to excessive levels of groundborne <br />vibration. <br />Construction Vibration Impacts. Construction activity at projects within the plan area would <br />generate varying degrees of ground vibration, depending on the construction procedures and <br />equipment. Operation of construction equipment generates vibrations that spread through the <br />ground and diminish with distance from the source. The effect on buildings in the vicinity of the <br />construction site varies depending on soil type, ground strata, and receptor -building construction. <br />The results from vibration can range from no perceptible effects at the lowest vibration levels, to <br />low rumbling sounds and perceptible vibrations at moderate levels, to slight structural damage at <br />the highest levels. Vibration from construction activities rarely reaches the levels that can damage <br />structures but can achieve the audible and perceptible ranges in buildings close to the <br />construction site. <br />Vibration generated by construction equipment has the potential to be substantial, since it has the <br />potential to exceed the FTA criteria for architectural damage (e.g., 0.12 inches per second [in/sec] <br />PPV for fragile or historical resources, 0.2 in/sec PPV for non -engineered timber and masonry <br />buildings, and 0.3 in/sec PPV for engineered concrete and masonry). Construction details and <br />equipment for future project -level developments under the GPU are not known at this time but <br />may cause vibration impacts. <br />Santa Ana General Plan Update <br />CEQA Findings of Fact and Statement <br />Of Overriding Considerations -33- <br />October 2021 <br />