Laserfiche WebLink
<br />Ordinance No. NS-XXX <br />Page 10 of 16 <br />(a) Location within project, relationship to non-inclusionary units. All inclusionary units <br />shall be: <br /> <br /> (1) Reasonably dispersed throughout the residential project; <br /> <br /> (2) Proportional, in number of bedrooms, gross floor area of habitable space, <br />and location, to the market rate units; <br /> <br /> (3) Comparable to the market rate units included in the residential project in <br />terms of design, materials, finished quality, and appearance; and <br /> <br /> (4) Permitted the same access to project amenities and recreational facilities, <br />as are market rate units. <br /> <br />(b) Timing of construction. All inclusionary units in a residential project shall be <br />constructed concurrent with, or before the construction of the market rate units. If the city <br />approves a phased project, a proportional share of the required inclusionary units shall <br />be provided within each phase of the residential project. <br /> <br />(c) Location outside the proposed original project. For projects where the developer <br />proposes to either produce new inclusionary units or rehabilitate existing off-site units to <br />meet the inclusionary affordable housing requirements of this ordinance, the off-site <br />project(s) containing the required inclusionary units shall be subject to the following <br />requirements: <br /> <br /> (1) The sum-total area (in habitable square feet) of all the newly constructed <br />off-site inclusionary units shall be the same number of habitable square feet of <br />inclusionary area as required by this ordinance. For the purpose of the calculation of the <br />number of square feet of required inclusionary housing, the total gross habitable square <br />feet of the housing units of the original market rate project shall be used, as measured <br />from exterior walls to exterior walls of the market units provided as the base for <br />calculation. The common areas, exterior hallways, stairways, patios, and balconies shall <br />not be calculated in determining the number of required square feet of inclusionary <br />housing production. All new or rehabilitated units must meet all current zoning and <br />general plan standards. <br /> <br /> (2) While the total number of square feet of inclusionary housing requirement <br />is calculated based on the requirements of this ordinance, the number of units, bedrooms <br />and other amenities on the proposed off-site inclusionary housing location shall be <br />approved by the review authority commensurate with the size and type of units most in <br />demand at the time of submittal of the application. <br /> <br /> (3) Any off-site affordable inclusionary housing project shall be substantially <br />comparable to the market rate units included in the residential project in terms of quality <br />of design, materials and finishes. <br />