Item 13 - SR-55/Ritchey Street Water Improvements

Home Browse Search

ON#STC Jay Losofsky Start -Up Engineer/ Electrical Equipment Specialist Power I and C Start -Up Engineer City of Fountain Valley Raymond Ave Pump Station - Provided technical support instrument and controls support during the construction and startup of the new pump station. Activities included inspection of the installed electrical equipment and transformer, wiring continuity and loop checks, verification and inspection of the analog controls and start up support during commissioning. Worked closely this the engineer and the CM team to resolve technical issues that were encountered during start up. Power I and C Start -Up Engineer, Chino II Desalter Concentrate Reduction Facility; Jurupa Valley, CA; Chino Basin Desalter Authority (Completion: 2016; Value: $46.6 million)— Provided technical support during the construction and testing of the high Voltage equipment; worked directly the fabricator and contractor to resolve construction problems. Advised the project team on technical and safety related issues, reviews submittals, and testing procedures. Witness field testing to confirm the equipment is properly installed and safe to operate. Reviews field test data for conformance to the specs and industry standards. Power I and C Start -Up Engineer, Burris Pump Station Project —Phase 2, Orange County Water District —Provided technical support during the construction and testing of the high Voltage equipment associated with the new construction of a 10,000 SF storm water pump station that utilized four conventional vertical turbine pumps installed in a circular wet well. The pump station will also consist of new mechanical, electrical, and control system. Provide technical support during constructability review of drawings, and specs prior to bidding. Provided submittal review for the pump/motors and technical support for the PLC logic that controls the pumps. Witness the motor tests at the factory, complete final inspection prior to shipment (international fabricator). Work with the PLC programmer to complete loop testing and calibrations prior to start up and commissioning. Work with the project team, contractor and operations to develop a startup plan and coordinated the activities of the equipment manufacturer's reps for startup. Assist in training the operators on the new equipment as required. Advised the project team on technical and safety related issues, reviews submittals, and testing procedures. Witness field testing to confirm the equipment is properly installed and safe to operate. Reviews field test data for conformance to the specs and industry standards. Power I and C Start -Up Engineer, Lake Hodges Pipeline and Hydro Electric Pump Station (San Diego County Water Authority) --Provided technical support during the construction and testing of the high Voltage equipment; worked directly the fabricator and contractor to resolve construction problems. Advised the project team on technical and safety related issues, reviews submittals, and testing procedures; assisted in the development of an 0&M manual for the project. Witness field testing to confirm the equipment is properly installed and safe to operate. Reviews field test data for conformance to the specs and industry standards. Start Up Engineer, San Vicente Pump Station Projects (San Diego County Water Authority - Parsons Brinkerhoff) --As Start -Up Engineer, Mr. Losofsky provides oversight and Engineering Project Start up Support on behalf of SDCWA during the construction, installation and commissioning of 6000 HP pumps, mechanical and electrical equipment associated with this project. Primary duties included providing expert technical assistance during the startup of the pump station verifying conformance to specification requirements.