NS-1794 - Laserfiche WebLink

Home Browse Search

ORDINANCE NO. NS- 1794 PAGE SIX Vandal resistant cover is a protective cover constructed of either acrylic, polycarbonate or wire mesh which totally encloses the light source. The wire mesh must have a maximum 1/4 inch mesh. The polycarbonate and acrylic must have a minimum 1/8 inch thickness. The purpose of the cover is to discourage the willful destruction of the light source. Visibility corridor is an opening of at least a 10-inch square and shall be located a minimum of 36 inches and not to exceed 50 inches above ground level. Window assembly is a unit composed of a group of parts or components which make up a closure for an opening in a wall or roof (including the anchorage) to control light, air, and other elements. Window frame is that part of a window which surrounds and supports the sashes and is attached to the surrounding wall. The members include side jambs (vertical), head jamb (upper, horizontal), sill and mullions. SECTION 3: That Section 8-202 of the Santa Ana Municipal Code is hereby amended to read as follows: Sec. 8-202. Definition of "enforcing authority" As used in this division, the term "enforcing authority" shall mean the Executive Director of Community Development and Housing and his authorized representatives. SECTION 4: That the Santa Ana Municipal Code is hereby amended by adding a section, to be numbered 8-203, which said section reads as follows: Sec. 8-203. Enforcement. The enforcing authority is hereby empowered and directed to administer and enforce the provisons of this division relating to physical security requirements for buildings in the City of Santa Ana. Plans and specifications for proposed construction must be approved by the enforcing authority in accordance with the provisions of this division. No building permit is to be finally approved or utility release given unless the applicant for said permit or release has satisfied the enforcing authority that applicant has complied with this division.