NS-1794 - Laserfiche WebLink

Home Browse Search

ORDINANCE NO. NS- 1794 PAGE SEVEN SECTION 5: That Section 8-208 of the Santa Ana Municipal Code is hereby amended to read as follows: Sec. 8-208. Garage-type doors. solid shall (a) Garage-type doors, which are either rolling overhead, swinging, sliding, or accordian style conform to the following standards: overhead, doors (1) Wood doors shall have panels a minimum of five-sixteenths (5/16) inch in thickness with the locking hardware being attached to the support framing. (2) Aluminum doors shall be a minimum thickness of .0215 inches and riveted together a minimum of eighteen (18) inches on center along the outside seams. There shall be a full width horizontal beam attached to the main door structure which shall meet the pilot, or pedestrian access, door framing within three (3) inches of the strike area of the pilot or pedestrian access door. (3) Fiberglass doors shall have panels a minimum of six (6) ounces per square foot from the bottom of the door to a height of seven (7) feet. Panels above seven (7) feet and panels in residential structures have a density of not less than five (5) ounces per square foot. (b) Where sliding or accordian doors are utilized, they shall be equipped with guide tracks which shall be de- signed so that the door cannot be removed from the track when in the closed and locked position. (c) Doors that exceed sixteen have two (2) lock receiving points, of the door. (16) feet in width shall one located on each side Doors not exceeding sixteen (16) feet shall have one lock receiving point placed on either side of the door. A single bolt may be used in the center of the door with the locking point located either in the floor or door frame header.