CANNON CORPORATION - Laserfiche WebLink

Home Browse Search

Environmental ECORP will provided the following environmental scope items: • Review project plans, specifications, environmental documentation, and relevant permits to understand the proposed development's scope and potential environmental impacts. • Confirm compliance with local, state, and federal environmental regulations, including, but not limited to, the California Environmental Quality Act (CEQA), Clean Water Act (CWA), Endangered Species Act (ESA), and air quality regulations. • Provide an environmental plan check report documenting findings, mitigation measures, and recommended conditions of approval. • Confirm plans and specifications align with the City's commitment to sustainable development and environmental stewardship, aiming to protect natural resources. Transportation/Traffic Studies We will verify conformance to specific circulation plans, including transportation management plans, master plans of streets and highways, general circulation plans and coordination of these plans with those developed by metropolitan planning organizations. Signing and Striping and Traffic Signal Plans Cannon will verify conformance with applicable traffic engineering design standards, such as California MUTCD, Caltrans Traffic Manual, Caltrans Highway Design Manual, American Association of State Highway, Work Area Traffic Control Manual, and National Association of City Transportation Officials Bikeway Design guide for bicycle facilities. Our review will also assess various Intelligent Transportation System (ITS) component designs (including changeable message signs, closed circuit television, etc.), traffic safety studies, speed zone surveys, "red light" camera investigations, parking studies, demonstration projects, bicycle studies and facilities design, transit studies, truck studies, traffic studies for new development, and traffic signal coordination timing development. We will verify that striping construction notes are referencing the appropriate Caltrans Standard Plans A20A through A20G for striping and A24A through A24H for pavement markings. We will also verify other traffic related items meet minimum standards, such as lane widths, taper lengths, sign placement, crosswalk width, etc. Street Lighting Plans Cannon will provide plans review for street lighting and voltage drop calculations in compliance with the City's Lighting Standards. Work will include public street lighting plan checking and voltage drop calculation services in the City. There will be coordination with client and utility consultant to verify electrical service pedestal locations and street light standard specification. Voltage drop calculation services will include verifying voltage drop for branch circuits and adequate wire and conduit sizing for the street lighting project. Plan check requirements, specific City design guidelines for street lighting and conformance of current electrical, state, and jurisdictional standards/codes will be verified.