Laserfiche WebLink
tq.L) DIMENSIONS U <br />SIGNS • BANNERS • FLAGS • INTERIOR DESIGN... <br />am <br />i <br />b. Shop drawings will be reviewed and stamped by licensed engineer <br />.E <br />L <br />4) Production <br />O <br />O <br />a. Outdoor Dimensions will produce these signs 100% in house to control the quality <br />O <br />expectation of City of Santa Ana <br />i. Process will begin in metal fabrication department where fabricators will <br />cut skins out of aluminum substrate <br />ii. After skins are cut to size fabricators will cut and weld 2" square aluminum <br />tubing to create the frame/structure of each monument <br />iii. Once structure is complete the cut aluminum skins will be applied and be <br />sanded to rid of any imperfections and seams <br />iv. Structure is then transferred to finish workshop where sign will be layered <br />with coat of automotive grade primer, sanded once more to insure smooth <br />surface, and finally layered with automotive grade paint (to drawing specs.) <br />v. Simultaneously with the finish process the acrylic push through elements <br />will be routed out of UL certified acrylic for illuminated copy affect. <br />5325 East Hunter Avenue, Anaheim CA. 90807 P: 714.579.9555 F: 714.893.5978 <br />© 2019 Outdoor Dimensions, LLC. All Rights Reserved. <br />