IDS GROUP (8) - Laserfiche WebLink

Home Browse Search

F. CIVIL ENGINEERING PLANS. The consultant shall beresponsible for the preparation of any civil engineering plans required for this project induding,butnut|imoitedto,the fn||ovxin@C Horizontal and Vertical Control plan, On -site Grading and Drainage plan, Site Utility Plan, and plans to include improvements in the public right'uf'vvay,asapplicable. G. LANDSCAPE AND IRRIGATION PLANS. The consultant shall beresponsible for the preparation ofany landscape architectural plans required for this project induding, but not limited to, the following; Site Layout/Construction Plans and Details including all architectural feature components identified in the introduction portion of this RFP, Site Sections (as applicable), and Planting and Irrigation (plans, Details, Notes, H. ARCHITECTURAL PLANS. The consultant shall be responsible for the preparation of any architectural plans required for this project including, but not limited to, Foundation Plan, Floor Plan, Framing Plan, Reflected Ceiling Plan, Door/Window/Hardware/Finish Schedules, Building Sections, Interior and Exterior Elevations, Architectural Detailing, Structural Engineering, ADACompliance. MECHANICAL/ELECTRICAL/PLUMBING (MEP) PLANS. The consultant shall be responsible forthe preparation of any MEP electrical plans required for this project including HVACsystenn, electrical site & floor plans, location of panels, amitchgear, meters, schedules, details, photometric analyses, and general notes. J. PERMITTING. The consultant shall be responsible for identifying and applying for any necessary permits. All permit requirements shall be included in the bid package for the project, as applicable. K. PLANS, SPECIFICATIONS AND ESTIMATES /PS&E\ o Development ofPlans, Specifications and Estimate (PS6tB): a) All reports, plans, specifications and quantity calculations shall conform tocriteria, policies, procedures and standards of the City. The Cuooukuot obul| use the boilerplate for cut sheets, specifications and estimates provided bvthe City. b) The p\mo development shall include three (3) milestone deliverables-- 0Y4, 60%, qU% (pre-final)and 100% (final). All plan sheets shall be prepared at a reasonable standard scale to be noted on plans. The ncocxyury plans for each PSJ&E package shall include, but are not be limited to: TmmkJ/ Preliminary design phase shall include Kick-off meeting with City Staff todiscuss scope oil'*nrk project goals and objectives, potential elements and issues, schedule. Task 2: Design Development (60% plans) Design development phase will involve development of plans based upon Task linformation and City of Santa Ana FZFP 24-1 OOA