BAINBRIDGE GROUP, INC. 2 -2004 - Laserfiche WebLink

Home Browse Search

Take exposure level air tests, soil samples, lead wipes and bulk samples as required in the contract documents/specifications. Conduct periodic review of isolation and containment barriers to determine if they are in compliance with the requirements of the contract documents/specifications. Thereafter, provide area monitoring at least once every work shift for the duration designated in the contract documents. Monitoring shall be conducted outside the building, inside the Work area and at critical locations adjacent to the Work area, including the negative air pressure equipment exhaust. At the discretion of the monitor, more frequent area monitoring may be provided. Conduct "clearance testing" in the form of lead wipes and/or soil sampling as required. Stopping the Work: If at any time the City, City's Representative or the Monitoring Personnel decides that work practices are violating pertinent regulations or in its opinion endangering residents and other personnel, it will immediately notify the Contractor (followed up in writing) that operations shall cease until corrective action is taken by the Contractor. The Contractor shall take such corrective action before proceeding with the Work. Loss or damage due to the stop work order shall be the Contractor's responsibility and expense. Reports: Make daily written reports of observation activities for the City's use. Issue "Certificate of Completion" or "Certificate of Substantial Completion" upon correction of the punch list items, per 24 CFR Part 35. Upon completion of the Work, compile a documentation report book covering activities performed under this section and the contract requirements and deliver one (1) copy of the book to the City. Community Development Agency - City of Santa Ana Lead-Based Paint Consulting Services - Updated Qualifications The Bainbridge Group, Inc. Environmental Consultants MBE/DBE Page 12 of 14