SecSol - Laserfiche WebLink

Home Browse Search

B. Monitoring Power and Control Shutdowns: Continuance of site power during this expansion process is important. Therefore, CONTRACTOR shall carefully examine all work to be done in, on, or adjacent to existing equipment. Work shall be scheduled subject to CITY's approval to minimize required shutdown time. The CONTRACTOR shall submit a written sequence and duration of activities to be performed during each site shutdown. 2. All switching, safety tagging, etc., required for plant shutdown or to isolate existing equipment shall be performed by the CONTRACTOR. In no case begin any work in, on, or adjacent to existing equipment without written authorization by the CITY or ENGINEER. C. Modifications to Existing Electrical Facilities: 1. The CONTRACTOR shall make all modifications or alterations to existing electrical facilities required to successfully install and integrate the new electrical equipment as shown. All modifications to existing equipment, panels, MCCs, or cabinets shall be made in a professional manner with all coatings repaired to match existing. The total costs for all modifications to existing electrical facilities required for a complete and operating system shall be included in the CONTRACTOR's original bid amount and no additional payment for this work shall be authorized. The CONTRACTOR in digging trenches in order not to damage existing underground utilities shall exercise extreme caution. Cost of repairs of damages caused during construction shall be the CONTRACTOR's responsibility. 2. The CONTRACTOR shall be responsible for verifying all available existing circuit breakers in existing lighting panels for their intended use as required by the drawings. Expenses in time for such work shall be included in the CONTRACTOR's original bid amount. - END OF SECTION - City of Santa Ana Basic Electrical Requirements Security Management System Project Page 16010-5 SantaAna_SMS_16010