Pacific Building Care, Inc 1 - Laserfiche WebLink

Home Browse Search

and other containers marked TRASH" (or are obviously trash) shall be removed. All waste from such trash receptacles shall be removed from the area and emptied into a designated trash dumpster or receptacle in such a manner as to prevent the adjacent area from becoming littered by such trash. N. GENERAL CLEANUP Remove litter. Sweep or vacuum soil from floors. Spot clean unsightly soil from building, fixture and surfaces. Spot mop floors to remove liquids and unsightly soil. Empty trash and ash receptacles that may become filled prior to the scheduled routine cleaning. Refill dispensers that may become depleted prior to the next scheduled routing cleaning. Remove carpet stains. O. REARRANGE FURNITURE All furniture moved by the Contractor during the performance of the services shall be returned to its appropriate location. All items such as chairs, trash receptacles, etc., shall be returned to their appropriate location. P. REFILL DISPENSERS Check and refill each toilet paper dispenser, hand soap dispenser, paper towel dispensers, toilet seat cover dispenser, etc. The supplies shall be placed in the dispensers in accordance with the directions of the supply and dispenser manufacturers. Hand soap dispensers and adjacent surfaces shall be wiped to remove spillage. Q. REMOVE CARPET, CHAIR UPHOLSTERY, PANEL/WALL FABRIC STAINS 1. Spray the spot with a water -based solvent (pH8.5 to 9.5), and allow ten- (10) minute dwell time. Agitate soiled area with a soft -bristled nylon brush and extract residue with warm water. 2. If the stain is a coffee spill, use Interface Coffee Breaker or some like product and follow manufacturer's recommended procedures. Do not extract or blot. Simply spray affected area. R. REPLACE TRASH RECEPTACLE LINERS All obviously soiled or torn trash receptacle liners shall be replaced with a new trash receptacle liner. The liner shall be replaced in such a manner as to present a neat uniform appearance. S. WAX VINYL/TELE FLOORS If there are black marks, marks from chair glides, imbedded soil in the finish, remove before re -waxing. One uniform thin coat of approved floor finish will be applied. A one -tile border next to the walls will not be recoated. After the finish has dried, the appearance will be uniform with no visible stress, swirls, etc.