Laserfiche WebLink
<br />Attachment B <br /> <br />, LDV, Inc. <br />LDva 180 Industrial Drive <br />Burlington, WI 53105 <br />800.558.5986 <br />Fax 262.763.0156 <br /> www./dvusa.com <br />Section Qty <br /> 23. Custom front wheel cutouts for 1 OR22.5 tires. <br /> 24. Rear frame-mounted tow eyes extending past body. <br /> 25. Aluminum engine box cover with acoustical and thermal insulation. Black molded ABS <br /> composite engine box over-lay. <br /> 26. Full length skirting. Skirt shall extend 18" down from the bottom of floor extrusions. <br /> 27. Dash shall be vacuum formed ABS composite with integrated control pod located left of dash. <br /> 28. All clearance and side marker lights to be LED. <br /> 29. Standard structural warranty of 5 years or 50,000 miles and standard component warranty of 12 <br /> months or 12,000 miles. <br /> 30. The vehicle shall be fully sanded on all exterior surfaces with no more than 150 grit to assure <br /> removal of imperfections in metal surface. All aluminum shall be chemically etched and primed prior <br /> to painting. Base body color shall be oven baked and painted with Dupont Imron 5000 to <br /> commercial truck standards. <br /> Note: Specifications are from body manufacturer and are subject to change without notice. <br />3.02 1 32" wide x 82" high 0.125" aluminum sedan door with 21.5" wide x 25.5" high fixed window and mini <br /> blind. Door shall have continuous stainless steel piano hinge, two (2) nylon door straps and an <br /> aluminum drip rail. Located as shown on drawing. <br />3.03 1 32" wide x 76" high 0.125" aluminum sedan door mounted at floor level with 21.5" wide x 25.5" high <br /> fixed window and mini-blind. Door shall have continuous stainless steel piano hinge, two (2) nylon <br /> door straps and an aluminum drip rail. Located as shown on drawinq. <br />3.04 4 Heavy-duty fluted aluminum grab handle with rubber inserts and chrome plated stanchions installed <br /> at exterior entry door location. <br />3.05 2 Heavy-duty fluted aluminum grab handle with rubber inserts and chrome plated stanchions installed <br /> inside entry door. <br />3.06 4 Automatic courtesy Iiqht at side entry door. <br />3.07 1 Courtesy Iiqht defeat switch on dash. <br />3.08 1 24" Single C manually operated exterior entrance step X053W951247 (or current model). Located <br /> as shown on drawinq. <br />3.09 1 Swing out stairs mounted on box pan door in body skirt. Includes removable railing that will be <br /> stowed behind sedan door. Located as shown on drawina. <br />3.10 Whelen 810 Series combination stop/tail, turn and reverse lights, model number 8103RACR (or <br /> current model). <br />3.11 Entire underside of the apparatus shall be undercoated. Includes chassis, floor extrusions, step <br /> wells and aluminum compartments. <br />3.12 Rear mud flaps with anti-sail brackets. <br />4.00 LDV SLlDE.OUT: <br /> 1. Body shall have two (2) slide-out rooms with approximate dimensions as follows: 78" high x 140" <br /> long x 30" deep and 72" high x 100" long x 30" deep. <br /> 2. The slide-out room shall be constructed of heavy duty tubular aluminum with welded joints for <br /> superior strength. <br /> 3. The sides of the room shall be sheeted with aluminum sanded and painted to match the exterior. <br /> 4. When in the closed position the slide-out room shall have a gap of less than .5" around the entire <br /> perimeter of the slide-out wall and the exterior side wall. <br /> 5. The slide-out shall incorporate a full perimeter air seal and wiper retainer to wipe debris from the <br /> room when sliding in and out. The structure around the air seal shall be reinforced to support the air <br /> seal. <br /> 6. Slide-out seal shall provide a weather tight seal without the use of an awning. <br /> <br />Copy of Huntington Beach Police Department (CA) MCC30LLC260-0:D2 MS.xls <br /> <br />6/16/2005 <br />