Laserfiche WebLink
<br />a. All material excavated or graded will be sufficiently watered <br />to prevent excessive amounts of dust. Watering with <br />complete coverage shall occur at least twice daily, once in <br />the late morning and once after work is done for the day. <br /> <br />b. All clearing and earthwork activities shall cease during <br />period of high winds (winds greater than 25 mph averaged <br />over one hour) or during Stage 1 or Stage 2 smog episodes. <br /> <br />c. Streets surrounding the project site should be cleaned at the <br />end of each day of construction. <br /> <br />d. The amount of area disturbed by clearing and earthwork <br />activities shall be minimized at all times. <br /> <br />e. Equipment engines shall <br />and in proper tune <br />specifications. <br /> <br />be maintained in good condition <br />according to manufacturer's <br /> <br />30. Building plans for the proposed project shall reflect that onsite <br />lighting on the project site is located in such a manner that the <br />direct rays of the lighting are confined to the property and would not <br />spill over to adjacent residential areas. <br /> <br />31. Grading Plans and Building Plans for the proposed project shall <br />note that construction activities on the project site shall take place <br />between the hours of 7:00 a.m. and 8:00 p.m. Monday through <br />Friday, 8:00 a.m. and 8:00 p.m. on Saturday, and no construction <br />activity on Sundays or federal holidays, and that no construction <br />equipment on the project site shall operate including warming up <br />until after 7:00 a.m. Monday through Friday and 8:00 a.m. on <br />Saturday. <br /> <br />32. Grading Plans and Building Plans for the proposed project shall <br />note that all construction equipment shall be properly maintained <br />and tuned to minimize noise emissions. <br /> <br />33. Grading Plans and Building Plans for the proposed project shall <br />note that all equipment shall be fitted with properly operating <br />muffiers and air intake silencers. <br /> <br />34. The building plans for the proposed project shall reflect a 20-foot <br />noise wall along the northeastern boundary of the project a site. <br />The noise wall shall have a surface density of at least 3.5 pounds <br />per square foot and shall not have openings or gaps. The noise <br />wall may be constructed of stud and stucco, 3/8 inch plate glass, <br /> <br />Resolution No. 2005-108 <br />Page 9 of 11 <br />