SECURITY SOLUTIONS, INC. 2 - Laserfiche WebLink

Home Browse Search

A. General: It is intended that sufficient supplies necessary to support one year's operation and all tools and test equipment necessary to troubleshoot and maintain the system shall be furnished with the system. B. Tools: All tools required for repair, calibrate, program, and maintain the equipment - furnished shall be provided. Where extension boards or modules are required, at least two (2) of each type shall be provided. PART 3 — EXECUTION 3.1 INSTALLATION A. General: Under the supervision of the SMS Supplier and in accordance with the manufacturer's instructions, all systems specified in the applicable Sections of Division 16 & 17 shall be installed, connected, calibrated and tested; and in coordination with the ENGINEER and the CITY, shall be started to place the system in operation. This shall include final calibration in concert with equipment specified elsewhere in these Contract Documents. B. Nothing in this part of the specifications shall be construed as requiring the CONTRACTOR to utilize personnel supplied by its designated SMS Supplier organization, or any division thereof, to accomplish the physical installation of any elements, instruments, accessories or assemblies specified herein. However, the CONTRACTOR shall employ installers who are skilled and experienced in the installation and connection of all elements, instruments, accessories and assemblies. Electrical work shall be performed as specified in the applicable sections of Division 16. C. The exact locations and routing of wiring and cables shall be governed by structural conditions and physical interference and by the location of electrical terminations on equipment. Where job conditions require reasonable changes in approximated locations and arrangements, the CONTRACTOR shall make such changes without extra cost to the CITY. D. All equipment shall be located and installed so that it will be readily accessible for operation and maintenance. The CITY reserves the right to require minor changes in location of equipment prior to roughing in without incurring any additional costs or charges. E. The CONTRACTOR and SMS Supplier shall review the existing site conditions and examine all shop drawings for the various items of equipment in order to determine exact routing and final terminations for all wiring and cables. F. Installation and Connection: The CONTRACTOR shall install and connect all field- mounted components and assemblies under the criteria imposed by the Specifications. The installation personnel shall be provided with a final reviewed copy of the shop drawings and data. G. The CONTRACTOR shall have a technical field representative of the SMS Supplier . instruct installation personnel on any and all installation requirements; thereafter, the City of Santa Ana Security Management System General Requirements Security Management System Project Page 17010 -11 SantaAna_SMS_17010