Laserfiche WebLink
<br />RFP 07-004 <br /> <br />. Support for synunetric data rates on the uplink and downlink. <br />. Scaleable to support system expansion. <br /> <br />3.8 Vehicle Client Requirements <br />. The equipment input power requirement is 5-15 VDC. <br />. The current drain shall not exceed 1.0 amps. <br />_. The equipment shall not consume more than 15 watts. <br />_. The power connection shall be a 12 VDC cable with inline fuse. <br />. The equipment shall operate over a temperature range of 0 to +55 degrees <br />Celsius. <br /> <br />. The equipment slnll be certified under FCC UNIT 31 SM. <br /> <br /> <br />. The equipment shall have a 10/100 Mbps Ethernet interface with RJ45 sealed <br /> <br /> <br />Ethernet boot connector. <br /> <br />. The equipment shall operate in the 2.4 GHz and the 4.9 GHz frequency bands. <br /> <br /> <br />. End users in the network shall be able to form a robust and stand-alone <br /> <br />broadband network among themselves. No infrastructure is required to make a <br />connection between end users, providing an infrastructureless mode of <br />operation. Every device shall function as both a modem and router <br /> <br />transceiver. <br /> <br />3.9 Wireless Client Card Requirements <br />. The wireless client card shall comply with the PC Card form factor as <br />specified by PCMCIA. <br />. The wireless client card shall draw no more than I amp. <br />. The wireless client card shall draw I amp while transmitting and 450 ma in <br />the receive mode. <br /> <br />Page 13 of 18 <br /> <br />EXHIBIT A if <br />