Laserfiche WebLink
10.6 Daily Damp Moppi~n ofNon-Carpeted Floors: Remove soil, hair, dust, and debris from <br />non-carpeted floors. Trash receptacles and other such small items shall be moved as <br />necessary and returned to their appropriate location. All accessible areas of the floor shall <br />be damped mopped. Care shall be taken to prevent splash and mop marks from being <br />visible on furniture legs, doors, etc., "Caution-Wet-Floor" signs shall ~be placed so as to <br />provide sufficient safety measures. After a floor has been damp mopped, it shall have no <br />puddled water and be free of soil, stains, debris, streaks, and swirl marks. All wet floor <br />signs shall be removed and put away after the floor surface is dry. <br />10.7. Daily De-scaling of Toilets and Urinals: Remove scum, mineral deposits, rust stains, etc. <br />10.8 Daily Disinfectine of Furniture Fixtures Walls & Partitions within Restrooms <br />Lunchrooms, and Locker Rooms: Damp wipe and disinfect all non-wood hard surfaces of <br />furniture, fixtures, walls, partitions, doors, and lockers. Special care shall be taken to <br />ensure these surfaces are not scratched, damaged or stained. <br />10.9 Daily Vacuumine of All Fabric Furniture Surfaces: Remove all dust, lint, hair, litter, and <br />dry soil from all fabric surfaces of chairs, couches, work station partitions, and other <br />furniture with a fabric covering. <br />10.10 Daily Dusting of Locker Togs: Dust locker tops in dressing areas, storage rooms, locker <br />rooms, and maintenance areas. <br />10.11 Daily Dustins~ of Buildinu Surfaces: Remove all dust, line, litter, dry soil, etc. from the <br />surface of ledges, window sills, locker tops, and fire extinguishers. This shall also be <br />done for counter tops, wall and door frames and sills, light switches, pictures, partitions, <br />rails, and other types of fixtures and surfaces which are not considered to be furniture <br />surfaces. This also applies for specialty equipment such as test equipment, computers, <br />typewriters, calculators, etc. which are located anywhere between the floor surface, up to <br />nine (9) feet in height. Dusting shall be accomplished by the removal of soil from the <br />area -not by moving it from one surface to another. This includes the cleaning of the <br />atrium wood ledges. <br />10.12 Daily Emptyin~ of all Trash and Ash Receptacles: All wastebaskets, cigarette ash <br />receptacles and other trash containers shall be emptied and returned to their initial <br />location. Boxes, cans, papers, and other containers marked "TRASH" (or are obviously <br />trash) shall be removed. All waste from such trash receptacles shall be removed from the <br />area and emptied into a designated trash dumpster or receptacle in such a manner as to <br />prevent the adjacent area from becoming littered by such trash. <br />10.13 Daily General Cleanup: Remove any found litter and clean unsightly soil from building, <br />fixtures, walls, door frames and doors, and surfaces. Remove any spilled liquids or solids. <br />Remove carpet stains. Pick up any towels from the floor or counters within locker rooms <br />and fitness center, placing towels in the proper receptacle. <br />10.14 Daily Rearraneing of Furniture: All furniture moved by the Contractor's employees <br />during the performance of services shall be returned to its appropriate location. All items <br />such as trash receptacles or desk chairs shall be moved so cleaning can take place <br />underneath them and then they shall be returned to their appropriate location. <br />10.15 Daily Refilling of Dis ensers: Check and refill each toilet paper dispenser, soap <br />dispenser, paper towel dispenser, toilet seat cover dispenser, and feminine hygiene <br />product dispenser. The supplies shall be placed in the dispensers in accordance with the <br />directions of the supply and dispenser manufacturers. Soap dispensers and adjacent <br />surfaces shall be wiped to remove spillage. Care shall be taken not to damage, dent or <br />bend dispensers. <br />25C-51 <br />