|
Figure 2(continued)
<br /> PIn1M GHG-1:. In accordance with provisions of Sections 15091(a)(2)and 15125A(a)(1)(B)of the State CECjA Guidelines,a lead Ongoing over the Lead Agency
<br /> agency for a project can and should consider mitigation measures to reduce substantial adverse effects related life of the plan
<br /> to greenhouse gas emissions.Such measures may include the following or other comparable measures
<br /> identified by the lead agency:
<br /> a) Integrate green building measures consistent with CALGreen(California Building Code Title 24),local
<br /> building codes and other applicable laws,into project design including:
<br /> i) Use energy efficient materials in building design,construction,rehabilitation,and retrofit,
<br /> ii) Install energy-efficient lighting,heating,and cooling systems(cogeneration);water heaters;appliances;
<br /> equipment;and control systems.
<br /> ii,) Reduce lighting,heating,and cooling needs bytaking advantage of light-colored roofs,trees forshade,
<br /> and sunlight
<br /> Iv) Incorporate passive environmental control systems thataccount forthe characteristics ofthe natural
<br /> environment.
<br /> v) Use high-efficiency lighting and making devices.
<br /> v) Incorporate passive solar design.
<br /> vl)Use h ig h-reftectivity build ing materials anal multiple glazi ng.
<br /> vii)Use no gas-powered landscape maintenance equipment
<br /> ix) Install altemative fuel(.e.,electric,hydrogen-fueled,etc.)vehicle charging and fueling stations.
<br /> x) Reduce woad burning staves or fireplaces.
<br /> xi) Provide bike lanes accessibility and packing at residential developments.
<br /> xis Encourages projects to reduce natural gas infrastructure in buildings and/or reduce the use of natural
<br /> gas appliances,with exceptions for limited uses.
<br /> b) Reduce emissions resulting from projects through implementation of project features,project design,or
<br /> othermeasures,such as those described in Appendix Fofthe State CEQA Guidelines.
<br /> c) Include off-site measures to mitigate a project's emissions.
<br /> d) Measures that consider incorporation of Best Available Control Technology(BACT)during design,
<br /> construction,and operation of projects to minimize(;HG emissions,including but not limited to:
<br /> i) Use energy and fuel-efficient vehicles and equipment;
<br /> i) Deployment of zero-and/or rear zero emission technologies;
<br /> ii) Use lighting systems that are energy efficient,such as LED technology;
<br /> iv) Use the minimum feasible amount of GHG-emitting construction materials;
<br /> v) Use cement blended with the maximum feasible amount of flash or other materials that reduce GHG
<br /> emissions from cement production;
<br /> v) Incorporate design measures to reduce GHG emissions from solid waste management through
<br /> encouraging solid waste recycling and reuse;
<br /> vi)Incorporate design measures to reduce energy consumption and increase use of renewable energy;
<br /> vui)Incorporate design measures to reduce water consumption;
<br /> Ix) Use fighter-colored pavement where feasible;
<br /> x) Recycle construction debris to maximum extent feasible;
<br /> xi) Plant shade trees in or near construction projects where feasible;and
<br /> xi7 Solicit bids that include concepts listed above.
<br /> e) Measures that encourage transit use,carpooling,bike-share and car-share programs,active transportation,
<br /> and parking strategies.,including,but not limited to the following:.
<br /> i) Promote transit-active transportation coordinated strategies
<br /> in Increase bicycle carrying capacity on transit and rail vehicles;
<br /> ii) Improve or increase access to transit;
<br /> iv) Increase access to common goods and services,such as groceries,schools,day care,and medical care;
<br /> v) Incorporates housing,including affordable housing,into the project;
<br /> v) Incorporate a neighborhood electric vehicle network;
<br /> v[i)Orient the project toward transit,bicycle,and pedestrian facilities,
<br /> viir]Improve pedestrian or bicycle networks,or transit service
<br /> ix) Provide traffic calming measures
<br /> x) Provide bicycle parking;
<br /> xi) Unnt or eliminate park supply,
<br /> xis Unbundle parking casts;
<br /> xii)Provide parking cash-out programs;
<br /> xiv)Implement or provide access to commute reduction program;
<br /> Q Incorporate bicycle and pedestrian facilities into project designs,maintain these facilities,and provide
<br /> amenities incentivaing their use,'and plan for and construct local bicycle projects that connect with the
<br /> regional network;
<br /> g) Improve transit access to rail and bus routes by incentives for construction of transit facilities within
<br /> developments,and/or providing dedicated shuttle service to transit stations;
<br /> h) Adopt employer trip reduction measures to reduce employee trips such as vanpool and carpool programs,
<br /> provide end-of-trip facilities,and telecommuting programs including but not limited to measures that:
<br /> i) Provide car-sharing,bike sharing,and ride-sharing programs;
<br /> i) Provide transit passes;
<br />
|