Laserfiche WebLink
5.2 Drags <br />5.2.1 Scarifying Drag: Used to scratch up or loosen up the skinned area. The drag shall be made of heavy- <br />duty steel capable of carrying additional weight (`s). Digging teeth shall be hardened and pointed <br />and be 1/2" in diameter. Pull chain shall be included. <br />5.2.2 Cutting and Leveling Drag: Used to level and backfill low spots in the skinned area. The leveling <br />drag and cutting blades shall be made of galvanized steel. This drag shall feature cutting blades that <br />are adjustable and capable of cutting down dirt build-up (high spots)and depositing dirt into holes <br />(low spots) creating a smooth and level playing surface. Pull chain shall be included. <br />5.2.3 Grooming or Finish Drag: Used to complete dragging procedure on a daily basis and lighter/gentle <br />movement of brickdust. This drag shall be galvanized metal "door-mat" link. Pull chain shall be <br />included. Drag shall be 6' in length by 6' in width. <br />5.3 Other Equipment <br />5.3.1 Hand Tamp: 20 lb. variety with 48" min. handle. Used to compact worn areas around bases, home <br />plate and pitching mound. <br />5.3.2 Plastic Sheeting and Duct Tape: Used to wrap hand tamp head and help prevent wet clay from <br />sticking. <br />5.3.3 Grade or Grooming Rake: Used to rake and fine level areas. Shall be made of aluminum, 36"wide <br />and a 6'handle. <br />5.3.4 Heaw Duty Shovels: Used to move material. Round/Square Point and Scoop shovels. <br />5.3.5 Heaw Duty Hose: Used to water down skinned area. Shall be 3/4" tol" top quality construction <br />with 225-psi working pressure. Leaks of any kind are not permitted. Contractor shall have a <br />minimum of 175' of hose on hand at all times. <br />5.3.6 High Pressure Nozzle: Attached to hose. Use to spray down brickdust and push excess brickdust off <br />turf edges. <br />5.3.7 Industrial Push Broom: Used to remove excess brickdust from turf edges. Shall be 24" min. wide <br />with heavy-duty dual weight bristles. <br />5.4 Wet Conditions Equipment" (Add to equipment above) <br />During periods of inclement weather or when the areas are wet the contractor shall have "on-hand" during all <br />brickdust maintenance operations the following items: <br />5.4.1 Squeegee: Used to push/squeeze water off wet areas or into dry areas or drains. Shall be 24" to 36" <br />wide with neoprene blade and magnesium/aluminum head. <br />5.4.2 "Super Sopper": Used to collect standing water in brickdust areas. Shall be drum type with exterior <br />sponge and arm holding drum. <br />5.4.3 Diamond or Beckson Pump: Used to remove standing water in brickdust areas. Shall be plastic with <br />flexible piston and value. <br />5.4.4 Infield Sopper with Wringer and Bucket: Used to collect standing water in brickdust areas. Sopper <br />shall be geotextile-covered sponge typical for absorbing chemical spills. <br />C-0.2&1 46 <br />2 <br />umv_