Laserfiche WebLink
Basic Service Warranty Terms <br />shipment of the replacement equipment, an invoice for replacement equipment will be generated and <br />will be due upon receipt. <br />Defective or faulty parts which are replaced under this warranty become the property of FAAC. <br />8. RESTRICTIONS <br />FAAC is not responsible for repair of damage resulting from any of the following: <br />a. vehicular or structural failure or accidents. <br />b. misuse or abuse by the customer or third parties. <br />c. unauthorized removal or movement of equipment. <br />d. inadequacy or failure of electrical power or air conditioning and /or extremes in humidity or <br />temperature. <br />e. attempted maintenance by other than FAAC Service Representatives, unless directed by a <br />FAAC Service Representative. <br />f. failure of the customer to comply with instructions provided by FAAC in the Site <br />Preparation Guide. <br />g. war, fire, flood, lightning, earthquakes or other factors beyond the control of FAAC. <br />9. USER RESPONSIBILITY <br />FAAC's obligation to service is contingent upon customer's proper use of the Simulator(s) in <br />accordance with FAAC published specifications as well as the customer's fulfillment of the <br />following responsibilities. The customer shall: <br />a. maintain the FAAC software for the Simulator at the latest version level delivered from <br />FAAC. <br />b. use the Simulator hardware in accordance with the documentation distributed to the <br />customer by FAAC at time of installation. <br />c. notify FAAC immediately if the Simulator needs maintenance. <br />d. maintain the environmental and power conditions recommended by FAAC in the Site <br />Preparation Guide for the Simulator. <br />e. not move, alter, add, or attach any hardware or software to the Simulator without the prior <br />written consent of FAAC. The warranty may be subject to an immediate revision of the fee <br />if, in FAAC's judgment, the proper maintenance of the Simulator is hampered. The <br />customer may attach peripheral or external devices where such interfaces are foreseen or <br />permitted in the use of the Simulator. <br />Failure to fulfill these responsibilities may invalidate the warranty. <br />10. LAPSE IN COVERAGE <br />If a lapse in coverage occurs on a Simulator and the customer desires to renew Warranty coverage, <br />two options are available. The new Warranty coverage can be paid retro- effective to the latest <br />Revised 04/07/2008 <br />4 <br />